|
|
@@ -1,1533 +1,1533 @@
|
|
|
-#!/bin/sh
|
|
|
-DEBUG="0"
|
|
|
-VERBOSE="0"
|
|
|
-ELITE="0"
|
|
|
-USERID=""
|
|
|
-IFACE=""
|
|
|
-checkvm_status=""
|
|
|
-MAC80211=0
|
|
|
-IW_SOURCE="https://mirrors.edge.kernel.org/pub/software/network/iw/iw-5.0.1.tar.gz"
|
|
|
-IW_ERROR=""
|
|
|
-if [ ! -d /sys/ ]; then
|
|
|
- printf "CONFIG_SYSFS is disabled in your kernel, this program will almost certainly not work.\n"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ "${1}" = "--elite" ]; then
|
|
|
- shift
|
|
|
- ELITE="1"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ "${1}" = "--verbose" ]; then
|
|
|
- shift
|
|
|
- VERBOSE="1"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ "${1}" = "--debug" ]; then
|
|
|
- shift
|
|
|
- DEBUG="1"
|
|
|
- VERBOSE="1"
|
|
|
-fi
|
|
|
-
|
|
|
-#yes, I know this is in here twice
|
|
|
-if [ "${1}" = "--elite" ]; then
|
|
|
- shift
|
|
|
- ELITE="1"
|
|
|
-fi
|
|
|
-
|
|
|
-
|
|
|
-if [ -n "${3}" ];then
|
|
|
- if [ "${3}" -gt 0 ] > /dev/null 2>&1; then
|
|
|
- CH="${3}"
|
|
|
- else
|
|
|
- printf "\nYou have entered an invalid channel \"${3}\" which will be ignored\n"
|
|
|
- CH=3
|
|
|
- fi
|
|
|
-else
|
|
|
- CH=10
|
|
|
-fi
|
|
|
-
|
|
|
-#TODO LIST
|
|
|
-
|
|
|
-#cleanup getDriver()
|
|
|
-#fix to not assume wifi drivers are modules
|
|
|
-#rewrite to not have two devices at any one time
|
|
|
-
|
|
|
-if [ -n "$(command -v id 2> /dev/null)" ]; then
|
|
|
- USERID="$(id -u 2> /dev/null)"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ -z "${USERID}" ] && [ -n "$(id -ru)" ]; then
|
|
|
- USERID="$(id -ru)"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ -n "${USERID}" ] && [ "${USERID}" != "0" ]; then
|
|
|
- printf "Run it as root\n" ; exit 1;
|
|
|
-elif [ -z "${USERID}" ]; then
|
|
|
- printf "Unable to determine user id, permission errors may occur.\n"
|
|
|
-fi
|
|
|
-
|
|
|
-#check for all needed binaries
|
|
|
-if [ ! -x "$(command -v uname 2>&1)" ]; then
|
|
|
- printf "How in the world do you not have uname installed?\n"
|
|
|
- printf "Please select a linux distro which has at least basic functionality (or install uname).\n"
|
|
|
- exit 1
|
|
|
-else
|
|
|
- OS=$(uname -s)
|
|
|
- #Recognized values are Linux and Darwin
|
|
|
-fi
|
|
|
-
|
|
|
-if [ ! -x "$(command -v ip 2>&1)" ] && [ ! -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
- printf "You have neither ip (iproute2) nor ifconfig installed.\n"
|
|
|
- printf "Please install one of them from your distro's package manager.\n"
|
|
|
- exit 1
|
|
|
-fi
|
|
|
-
|
|
|
-if [ ! -x "$(command -v iw 2>&1)" ]; then
|
|
|
- printf "You don't have iw installed, please install it from your distro's package manager.\n"
|
|
|
- printf "If your distro doesn't have a recent version you can download it from this link:\n"
|
|
|
- printf "${IW_SOURCE}\n"
|
|
|
- exit 1
|
|
|
-fi
|
|
|
-
|
|
|
-if [ ! -x "$(command -v ethtool 2>&1)" ]; then
|
|
|
- printf "Please install the ethtool package for your distro.\n"
|
|
|
- exit 1
|
|
|
-fi
|
|
|
-
|
|
|
-if [ -d /sys/bus/usb ]; then
|
|
|
- if [ ! -x "$(command -v lsusb 2>&1)" ]; then
|
|
|
- printf "Please install lsusb from your distro's package manager.\n"
|
|
|
- exit 1
|
|
|
- else
|
|
|
- LSUSB=1
|
|
|
- fi
|
|
|
-else
|
|
|
- LSUSB=0
|
|
|
-fi
|
|
|
-
|
|
|
-LSPCI=0
|
|
|
-# if [ -d /sys/bus/pci ] || [ -d /sys/bus/pci_express ] || [ -d /proc/bus/pci ]; then
|
|
|
-# PCI_DEVICES=0
|
|
|
-# if [ -d /sys/bus/pci/devices ] && [ "$(ls -1 /sys/bus/pci/devices 2>/dev/null | wc -l)" != '0' ]; then
|
|
|
-# PCI_DEVICES=1
|
|
|
-# elif [ -r /proc/bus/pci/devices ] && [ -n "$(cat /proc/bus/pci/devices 2>/dev/null)" ]; then
|
|
|
-# PCI_DEVICES=1
|
|
|
-# elif [ -d /sys/bus/pci_express/devices ] && [ -n "$(ls -1 /sys/bus/pci_express/devices 2>/dev/null | wc -l)" != '0' ]; then
|
|
|
-# PCI_DEVICES=1
|
|
|
-# fi
|
|
|
-
|
|
|
-# if [ ${PCI_DEVICES} -eq 0 ]; then
|
|
|
-# LSPCI=0
|
|
|
-# elif [ ! -x "$(command -v lspci 2>&1)" ]; then
|
|
|
-# printf "Please install lspci from your distro's package manager.\n"
|
|
|
-# exit 1
|
|
|
-# else
|
|
|
-# LSPCI=1
|
|
|
-# fi
|
|
|
-# else
|
|
|
-# LSPCI=0
|
|
|
-# fi
|
|
|
-
|
|
|
-if [ -f /proc/modules ] || [ -d /sys/module ]; then
|
|
|
- if [ ! -x "$(command -v modprobe 2>&1)" ]; then
|
|
|
- printf "Your kernel has module support but you don't have modprobe installed.\n"
|
|
|
- printf "It is highly recommended to install modprobe (typically from kmod).\n"
|
|
|
- MODPROBE=0
|
|
|
- else
|
|
|
- MODPROBE=1
|
|
|
- fi
|
|
|
- if [ ! -x "$(command -v modinfo 2>&1)" ]; then
|
|
|
- printf "Your kernel has module support but you don't have modinfo installed.\n"
|
|
|
- printf "It is highly recommended to install modinfo (typically from kmod).\n"
|
|
|
- printf "Warning: driver detection without modinfo may yield inaccurate results.\n"
|
|
|
- MODINFO=0
|
|
|
- else
|
|
|
- MODINFO=1
|
|
|
- fi
|
|
|
-else
|
|
|
- MODINFO=0
|
|
|
-fi
|
|
|
-
|
|
|
-if [ -c /dev/rfkill ]; then
|
|
|
- if [ ! -x "$(command -v rfkill 2>&1)" ];then
|
|
|
- printf "Your kernel supports rfkill but you don't have rfkill installed.\n"
|
|
|
- printf "To ensure devices are unblocked you must install rfkill.\n"
|
|
|
- RFKILL=0
|
|
|
- else
|
|
|
- RFKILL=1
|
|
|
- fi
|
|
|
-else
|
|
|
- RFKILL=0
|
|
|
-fi
|
|
|
-
|
|
|
-if [ ! -x "$(command -v awk 2>&1)" ]; then
|
|
|
- printf "How in the world do you not have awk installed?\n"
|
|
|
- printf "Please select a linux distro which has at least basic functionality (or install awk).\n"
|
|
|
- exit 1
|
|
|
-fi
|
|
|
-
|
|
|
-if [ ! -x "$(command -v grep 2>&1)" ]; then
|
|
|
- printf "How in the world do you not have grep installed?\n"
|
|
|
- printf "Please select a linux distro which has at least basic functionality (or install grep).\n"
|
|
|
- exit 1
|
|
|
-fi
|
|
|
-#done checking for binaries
|
|
|
-
|
|
|
-usage() {
|
|
|
- printf "usage: $(basename $0) <start|stop|check> <interface> [channel or frequency]\n\n"
|
|
|
- exit 0
|
|
|
-}
|
|
|
-
|
|
|
-handleLostPhys() {
|
|
|
- MISSING_INTERFACE=""
|
|
|
- if [ -d /sys/class/ieee80211 ]; then
|
|
|
- for i in $(ls /sys/class/ieee80211/); do
|
|
|
- if [ ! -d /sys/class/ieee80211/${i}/device/net ]; then
|
|
|
- MISSING_INTERFACE="${i}"
|
|
|
- printf "\nFound ${MISSING_INTERFACE} with no interfaces assigned, would you like to assign one to it? [y/n] "
|
|
|
- yesorno
|
|
|
- retcode=$?
|
|
|
- if [ "${retcode}" = "1" ]; then
|
|
|
- printf "PHY ${MISSING_INTERFACE} will remain lost.\n"
|
|
|
- elif [ "${retcode}" = "0" ]; then
|
|
|
- PHYDEV=${MISSING_INTERFACE}
|
|
|
- findFreeInterface monitor
|
|
|
- fi
|
|
|
- fi
|
|
|
- done
|
|
|
- fi
|
|
|
- #add some spacing so this doesn't make the display hard to read
|
|
|
- printf "\n"
|
|
|
-}
|
|
|
-
|
|
|
-findFreeInterface() {
|
|
|
- if [ -z "${1}" ]; then
|
|
|
- printf "findFreeInterface needs a target mode.\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- if [ "${1}" != "monitor" ] && [ "${1}" != "station" ]; then
|
|
|
- printf "findFreeInterface only supports monitor and station for target mode.\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- target_mode="${1}"
|
|
|
- if [ "$target_mode" = "monitor" ]; then
|
|
|
- target_suffix="mon"
|
|
|
- target_type="803"
|
|
|
- else
|
|
|
- target_suffix=""
|
|
|
- target_type="1"
|
|
|
- fi
|
|
|
- for i in $(seq 0 100); do
|
|
|
- if [ "$i" = "100" ]; then
|
|
|
- printf "\n\tUnable to find a free name between wlan0 and wlan99, you are on your own from here.\n"
|
|
|
- return 1
|
|
|
- fi
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "\nChecking candidate wlan${i}\n"
|
|
|
- fi
|
|
|
- if [ ! -e /sys/class/net/wlan${i} ]; then
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "\nCandidate wlan${i} is not in use\n"
|
|
|
- fi
|
|
|
- if [ ! -e /sys/class/net/wlan${i}mon ]; then
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "\nCandidate wlan${i} and wlan${i}mon are both clear, creating wlan${i}${target_suffix}\n"
|
|
|
- fi
|
|
|
- IW_ERROR="$(iw phy ${PHYDEV} interface add wlan${i}${target_suffix} type ${target_mode} 2>&1)"
|
|
|
- if [ -z "${IW_ERROR}" ]; then
|
|
|
- if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
- for j in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
- if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${j}/type)" = "${target_type}" ]; then
|
|
|
- #here is where we catch udev renaming our interface
|
|
|
- k=${j#wlan}
|
|
|
- i=${k%mon}
|
|
|
- fi
|
|
|
- done
|
|
|
- else
|
|
|
- printf "Unable to create wlan${i}${target_suffix} and no error received.\n"
|
|
|
- return 1
|
|
|
- fi
|
|
|
- printf "\n\t\t(mac80211 ${target_mode} mode vif enabled on [${PHYDEV}]wlan${i}${target_suffix}\n"
|
|
|
- unset IW_ERROR
|
|
|
- break
|
|
|
- else
|
|
|
- printf "\n\n ERROR adding ${target_mode} mode interface: ${IW_ERROR}\n"
|
|
|
- break
|
|
|
- fi
|
|
|
- else
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "\nCandidate wlan${i} does not exist, but wlan${i}mon does, skipping...\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
- else
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "\nCandidate wlan${i} is in use already.\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
- done
|
|
|
-}
|
|
|
-
|
|
|
-rfkill_check() {
|
|
|
- #take phy and check blocks
|
|
|
- if [ "${RFKILL}" = 0 ]; then
|
|
|
- #immediately return if rfkill isn't supported
|
|
|
- return 0
|
|
|
- fi
|
|
|
- if [ -z "${1}" ]; then
|
|
|
- printf "Fatal, rfkill_check requires a phy to be passed in\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- #first we have to find the rfkill index
|
|
|
- #this is available as /sys/class/net/wlan0/phy80211/rfkill## but that's a bit difficult to parse
|
|
|
- index="$(rfkill list | grep "${1}:" | awk -F: '{print $1}')"
|
|
|
- if [ -z "$index" ]; then
|
|
|
- return 187
|
|
|
- fi
|
|
|
- rfkill_status="$(rfkill list ${index} 2>&1)"
|
|
|
- if [ $? != 0 ]; then
|
|
|
- printf "rfkill error: ${rfkill_status}\n"
|
|
|
- return 187
|
|
|
- elif [ -z "${rfkill_status}" ]; then
|
|
|
- printf "rfkill had no output, something went wrong.\n"
|
|
|
- exit 1
|
|
|
- else
|
|
|
- soft=$(printf "${rfkill_status}" | grep -i soft | awk '{print $3}')
|
|
|
- hard=$(printf "${rfkill_status}" | grep -i hard | awk '{print $3}')
|
|
|
- if [ "${soft}" = "yes" ] && [ "${hard}" = "no" ]; then
|
|
|
- return 1
|
|
|
- elif [ "${soft}" = "no" ] && [ "${hard}" = "yes" ]; then
|
|
|
- return 2
|
|
|
- elif [ "${soft}" = "yes" ] && [ "${hard}" = "yes" ]; then
|
|
|
- return 3
|
|
|
- fi
|
|
|
- fi
|
|
|
- return 0
|
|
|
-}
|
|
|
-
|
|
|
-rfkill_unblock() {
|
|
|
- #attempt unblock and CHECK SUCCESS
|
|
|
- if [ "${RFKILL}" = 0 ]; then
|
|
|
- #immediately return if rfkill isn't supported
|
|
|
- return 0
|
|
|
- fi
|
|
|
- rfkill_status="$(rfkill unblock ${1#phy} 2>&1)"
|
|
|
- if [ $? != 0 ]; then
|
|
|
- rfkill_status="$(rfkill unblock $index 2>&1)"
|
|
|
- if [ $? != 0 ]; then
|
|
|
- if [ `echo "$blah" | grep "Usage" | wc -l` -eq 1 ]; then
|
|
|
- printf "Missing parameters in rfkill! Report this"
|
|
|
- else
|
|
|
- printf "rfkill error: ${rfkill_status}\n"
|
|
|
- fi
|
|
|
- printf "Unable to unblock.\n"
|
|
|
- return 1
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- sleep 1
|
|
|
- return 0
|
|
|
-}
|
|
|
-
|
|
|
-setLink() {
|
|
|
- if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
- ip link set dev ${1} ${2} > /dev/null 2>&1 || printf "\nFailed to set ${1} ${2} using ip\n"
|
|
|
- elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
- ifconfig ${1} ${2} > /dev/null 2>&1 || printf "\nFailed to set ${1} ${2} using ifconfig\n"
|
|
|
- fi
|
|
|
- return
|
|
|
-}
|
|
|
-
|
|
|
-ifaceIsUp() {
|
|
|
- if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
- ifaceIsUpCmd="ip link show dev"
|
|
|
- elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
- ifaceIsUpCmd="ifconfig"
|
|
|
- fi
|
|
|
- if ${ifaceIsUpCmd} ${1} 2>&1 | grep -q UP
|
|
|
- then
|
|
|
- return
|
|
|
- else
|
|
|
- return 1
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-#listIfaceUnspec() {
|
|
|
-# if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
-# ip link 2>/dev/null | awk -F"[: ]+" '/UNSPEC/ {print $2}'
|
|
|
-# elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
-# ifconfig -a 2>/dev/null | awk -F"[: ]+" '/UNSPEC/ {print $1}'
|
|
|
-# fi
|
|
|
-#}
|
|
|
-
|
|
|
-startDeprecatedIface() {
|
|
|
- iwconfig ${1} mode monitor > /dev/null 2>&1
|
|
|
- if [ -n "${2}" ]; then
|
|
|
- if [ ${2} -lt 1000 ]; then
|
|
|
- iwconfig ${1} channel ${2} > /dev/null 2>&1
|
|
|
- else
|
|
|
- iwconfig ${1} freq ${2}000000 > /dev/null 2>&1
|
|
|
- fi
|
|
|
- else
|
|
|
- iwconfig ${1} channel ${CH} > /dev/null 2>&1
|
|
|
- fi
|
|
|
- iwconfig ${1} key off > /dev/null 2>&1
|
|
|
- setLink ${1} up
|
|
|
- printf " (monitor mode enabled)"
|
|
|
-}
|
|
|
-
|
|
|
-yesorno() {
|
|
|
- read input
|
|
|
- case $input in
|
|
|
- y) return 0 ;;
|
|
|
- yes) return 0 ;;
|
|
|
- n) return 1 ;;
|
|
|
- no) return 1 ;;
|
|
|
- *) printf "\nInvalid input. Yes, or no? [y/n] "
|
|
|
- yesorno;;
|
|
|
- esac
|
|
|
-}
|
|
|
-
|
|
|
-startMac80211Iface() {
|
|
|
- #check if rfkill is set and cry if it is
|
|
|
- rfkill_check ${PHYDEV}
|
|
|
- rfkill_retcode="$?"
|
|
|
- case ${rfkill_retcode} in
|
|
|
- 1) printf "\t${1} is soft blocked, please run \"rfkill unblock ${index}\" to use this interface.\n" ;;
|
|
|
- 2) printf "\t${1} is hard blocked, please flip the hardware wifi switch (or in BIOS) to on.\n"
|
|
|
- printf "\tIt may also be possible to unblock with \"rfkill unblock ${index}\"\n"
|
|
|
- if [ "${checkvm_status}" != "run" ]; then
|
|
|
- checkvm
|
|
|
- fi
|
|
|
- if [ -n "${vm}" ]; then
|
|
|
- printf "Detected VM using ${vm_from}\n"
|
|
|
- printf "This appears to be a ${vm} Virtual Machine\n"
|
|
|
- printf "Some distributions have bugs causing rfkill hard block to be forced on in a VM.\n"
|
|
|
- printf "If toggling the rfkill hardware switch and \"rfkill unblock ${index}\" both fail\n"
|
|
|
- printf "to fix this, please try not running in a VM.\n"
|
|
|
- fi
|
|
|
- ;;
|
|
|
- 3) printf "\t${1} is hard and soft blocked, please flip the hardware wifi switch to on.\n"
|
|
|
- printf "\tIt may also be needed to unblock with \"rfkill unblock ${index}\"\n" ;;
|
|
|
- esac
|
|
|
- if [ "${rfkill_retcode}" != 0 ]; then
|
|
|
- printf "rfkill error, unable to start ${1}\n\n"
|
|
|
- printf "Would you like to try and automatically resolve this? [y/n] "
|
|
|
- yesorno
|
|
|
- retcode="$?"
|
|
|
- if [ "${retcode}" = "1" ]; then
|
|
|
- return 1
|
|
|
- elif [ "${retcode}" = "0" ]; then
|
|
|
- rfkill_unblock ${PHYDEV}
|
|
|
- fi
|
|
|
- fi
|
|
|
- #check if $1 already has a mon interface on the same phy and bail if it does
|
|
|
- if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
- for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
- if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "803" ]; then
|
|
|
- setChannelMac80211 ${i}
|
|
|
- printf "\n\t\t(mac80211 monitor mode already enabled for [${PHYDEV}]${1} on [${PHYDEV}]${i})\n"
|
|
|
- exit
|
|
|
- fi
|
|
|
- done
|
|
|
- fi
|
|
|
- #we didn't bail means we need a monitor interface
|
|
|
- if [ ${#1} -gt 12 ]; then
|
|
|
- printf "Interface ${1}mon is too long for linux so it will be renamed to the old style (wlan#) name.\n"
|
|
|
- findFreeInterface monitor
|
|
|
- else
|
|
|
- if [ -e /sys/class/net/${1}mon ]; then
|
|
|
- printf "\nYou already have a ${1}mon device but it is NOT in monitor mode."
|
|
|
- printf "\nWhatever you did, don't do it again."
|
|
|
- printf "\nPlease run \"iw ${1}mon del\" before attempting to continue\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- #we didn't bail means our target interface is available
|
|
|
- setLink ${1} down
|
|
|
- if [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ] || [ "${DRIVER}" = "88XXau" ]; then
|
|
|
- #grumble grumble, seriously crap vendor driver
|
|
|
- startDeprecatedIface ${1}
|
|
|
- setChannelMac80211 ${1}
|
|
|
- return
|
|
|
- fi
|
|
|
- IW_ERROR="$(iw phy ${PHYDEV} interface add ${1}mon type monitor 2>&1)"
|
|
|
- if [ -z "${IW_ERROR}" ]; then
|
|
|
- sleep 1
|
|
|
- if [ -r "/sys/class/ieee80211/${PHYDEV}/device/net/${1}mon/type" ] && [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${1}mon/type)" = "803" ]; then
|
|
|
- setChannelMac80211 ${1}mon
|
|
|
- else
|
|
|
- printf "\nNewly created monitor mode interface ${1}mon is *NOT* in monitor mode.\n"
|
|
|
- printf "Removing non-monitor ${1}mon interface...\n"
|
|
|
- stopMac80211Iface ${1}mon abort
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- printf "\n\t\t(mac80211 monitor mode vif enabled for [${PHYDEV}]${1} on [${PHYDEV}]${1}mon)\n"
|
|
|
- else
|
|
|
- printf "\n\nERROR adding monitor mode interface: ${IW_ERROR}\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ "${ELITE}" = "1" ]; then
|
|
|
- #check if $1 is still down, warn if not
|
|
|
- if ifaceIsUp ${1}
|
|
|
- then
|
|
|
- printf "\nInterface ${1} is up, but it should be down. Something is interfering."
|
|
|
- printf "\nPlease run \"airmon-ng check kill\" and/or kill your network manager."
|
|
|
- fi
|
|
|
- else
|
|
|
- isRPiWireless && iw ${1} del
|
|
|
- printf "\t\t(mac80211 station mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-isRPiWireless() {
|
|
|
- local HW_REV=$(grep Revision /proc/cpuinfo | awk '{print $3}')
|
|
|
- [ -z "${HW_REV}" ] && return 0
|
|
|
- # http://www.raspberrypi-spy.co.uk/2012/09/checking-your-raspberry-pi-board-version/
|
|
|
- # https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
|
|
|
- [ "${HW_REV}" = 'a22082' ] && return 1
|
|
|
- [ "${HW_REV}" = 'a32082' ] && return 1
|
|
|
- [ "${HW_REV}" = 'a52082' ] && return 1
|
|
|
- [ "${HW_REV}" = 'a02082' ] && return 1
|
|
|
- [ "${HW_REV}" = '9000c1' ] && return 1
|
|
|
- [ "${HW_REV}" = 'a020d3' ] && return 1
|
|
|
- [ "${HW_REV}" = '9020e0' ] && return 1
|
|
|
- return 0
|
|
|
-}
|
|
|
-
|
|
|
-startwlIface() {
|
|
|
- if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
- if [ -r "/proc/brcm_monitor0" ]; then
|
|
|
- local brcm_monitor="$(cat /proc/brcm_monitor0)"
|
|
|
- if [ "$brcm_monitor" = "1" ]; then
|
|
|
- printf "\n\t\t(experimental wl monitor mode vif already enabled for [${PHYDEV}]${1} on [${PHYDEV}]prism0)\n"
|
|
|
- return 0
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ -w "/proc/brcm_monitor0" ]; then
|
|
|
- printf "1" > /proc/brcm_monitor0
|
|
|
- if [ "$?" = "0" ]; then
|
|
|
- printf "\n\t\t(experimental wl monitor mode vif enabled for [${PHYDEV}]${1} on [${PHYDEV}]prism0)\n"
|
|
|
- else
|
|
|
- printf "\n\t\t(failed to enable experimental wl monitor mode for [${PHYDEV}${1})\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "\n\tUnable to write to /proc/brcm_monitor0, cannot enable monitor mode.\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "\n\tThis version of wl does not appear to support monitor mode.\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-#startDarwinIface() {
|
|
|
-# if [ -x /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport ]; then
|
|
|
-# if [ -n "${CH}" ] && [ ${CH} -lt 220 ]; then
|
|
|
-# /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport $1 sniff ${CH}
|
|
|
-# else
|
|
|
-# printf "Channel is set to none channel value of ${CH}
|
|
|
-# fi
|
|
|
-# fi
|
|
|
-#}
|
|
|
-
|
|
|
-setChannelMac80211() {
|
|
|
- setLink ${1} up
|
|
|
- if [ -n "${CH}" ]; then
|
|
|
- if [ ${CH} -lt 1000 ]; then
|
|
|
- if [ -r "/sys/class/net/$1/phy80211/name" ]; then
|
|
|
- channel_list="$(iw phy $(cat /sys/class/net/$1/phy80211/name) info 2>&1 | awk -F'[][]' '$2{print $2}')"
|
|
|
- local hardware_valid_channel=1
|
|
|
- for i in $channel_list; do
|
|
|
- if [ "${CH}" = "${i}" ]; then
|
|
|
- hardware_valid_channel=0
|
|
|
- break
|
|
|
- fi
|
|
|
- done
|
|
|
- if [ "${hardware_valid_channel}" = "1" ]; then
|
|
|
- printf "Channel ${CH} does not appear to be supported by ${1} hardware, defaulting to channel 3.\n\n"
|
|
|
- CH=3
|
|
|
- fi
|
|
|
- fi
|
|
|
- IW_ERROR="$(iw dev ${1} set channel ${CH} 2>&1)"
|
|
|
- else
|
|
|
- if [ -r "/sys/class/net/$1/phy80211/name" ]; then
|
|
|
- frequency_list="$(iw phy $(cat /sys/class/net/$1/phy80211/name) info 2>&1 | sed -nr 's/.*( |^)([0-9]+) MHz .*/\2/p')"
|
|
|
- local hardware_valid_freq=1
|
|
|
- for i in $frequency_list; do
|
|
|
- if [ "${CH}" = "${i}" ]; then
|
|
|
- hardware_valid_freq=0
|
|
|
- break
|
|
|
- fi
|
|
|
- print
|
|
|
- done
|
|
|
- if [ "${hardware_valid_freq}" = "1" ]; then
|
|
|
- printf "Frequency ${CH} does not appear to be supported by ${1} hardware, defaulting to 2422 Mhz.\n\n"
|
|
|
- CH="2422"
|
|
|
- fi
|
|
|
- fi
|
|
|
- IW_ERROR="$(iw dev ${1} set freq "${CH}" 2>&1)"
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "CH is unset, this should not be possible.\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- if [ -n "${IW_ERROR}" ]; then
|
|
|
- printf "\nError setting channel: ${IW_ERROR}\n"
|
|
|
- if printf "${IW_ERROR}" | grep -q "(-16)"; then
|
|
|
- printf "Error -16 likely means your card was set back to station mode by something.\n"
|
|
|
- printf "Removing non-monitor ${1} interface...\n"
|
|
|
- stopMac80211Iface "${1}" abort
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- if printf "${IW_ERROR}" | grep -q "(-22)"; then
|
|
|
- printf "Unable to set channel/frequency ${CH}, most likely it is outside of regulatory domain\n\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-stopDeprecatedIface() {
|
|
|
- setLink $1 down
|
|
|
- iwconfig $1 mode Managed > /dev/null 2>&1
|
|
|
- setLink $1 up
|
|
|
- printf " (monitor mode disabled)"
|
|
|
-}
|
|
|
-
|
|
|
-stopMac80211Iface() {
|
|
|
- if [ -f /sys/class/net/${1}/type ]; then
|
|
|
- if [ "${2}" != "abort" ] && [ "$(cat /sys/class/net/${1}/type)" != "803" ]; then
|
|
|
- printf "\n\nYou are trying to stop a device that isn't in monitor mode.\n"
|
|
|
- printf "Doing so is a terrible idea, if you really want to do it then you\n"
|
|
|
- printf "need to type 'iw ${1} del' yourself since it is a terrible idea.\n"
|
|
|
- printf "Most likely you want to remove an interface called wlan[0-9]mon\n"
|
|
|
- printf "If you feel you have reached this warning in error,\n"
|
|
|
- printf "please report it.\n"
|
|
|
- exit 1
|
|
|
- else
|
|
|
- if [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ] || [ "${DRIVER}" = "88XXau" ]; then
|
|
|
- #grumble grumble, seriously crap vendor driver
|
|
|
- stopDeprecatedIface ${1}
|
|
|
- return
|
|
|
- fi
|
|
|
- if [ "${ELITE}" = "0" ]; then
|
|
|
- local need_sta=1
|
|
|
- if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
- for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
- if [ -r /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type ] && [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "1" ]; then
|
|
|
- [ "${2}" != "abort" ] && printf "\n\t\t(mac80211 station mode vif already available for [${PHYDEV}]${1} on [${PHYDEV}]${i})\n"
|
|
|
- need_sta=0
|
|
|
- fi
|
|
|
- done
|
|
|
- fi
|
|
|
- if [ "${need_sta}" = "1" ] && [ -e /sys/class/net/${1%mon}/phy80211/name ]; then
|
|
|
- if [ "$(cat /sys/class/net/${1%mon}/phy80211/name)" = "${PHYDEV}" ]; then
|
|
|
- printf "\nYou already have a ${1%mon} device but it is NOT in station mode."
|
|
|
- printf "\nWhatever you did, don't do it again."
|
|
|
- printf "\nPlease run \"iw ${1%mon} del\" before attempting to continue\n"
|
|
|
- exit 1
|
|
|
- else
|
|
|
- printf "\nYou already have a ${1%mon} device, but it is not on the same phy as ${1}.\n"
|
|
|
- printf "\nAttemping to pick a new name...\n"
|
|
|
- findFreeInterface station
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ "${need_sta}" = "1" ]; then
|
|
|
- IW_ERROR="$(iw phy ${PHYDEV} interface add ${1%mon} type station 2>&1)"
|
|
|
- if [ -z "${IW_ERROR}" ]; then
|
|
|
- interface="${1%mon}"
|
|
|
- if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
- for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
- if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "1" ]; then
|
|
|
- #here is where we catch udev renaming our interface
|
|
|
- interface="${i}"
|
|
|
- fi
|
|
|
- done
|
|
|
- fi
|
|
|
- printf "\n\t\t(mac80211 station mode vif enabled on [${PHYDEV}]${interface})\n"
|
|
|
- else
|
|
|
- printf "\n\n ERROR adding station mode interface: ${IW_ERROR}\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
- setLink ${1} down
|
|
|
- IW_ERROR="$(iw dev "${1}" del 2>&1 | grep "nl80211 not found")"
|
|
|
- if [ -z "$IW_ERROR" ]; then
|
|
|
- if [ "${2}" != "abort" ]; then
|
|
|
- printf "\n\t\t(mac80211 monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
- elif [ "${2}" = "abort" ]; then
|
|
|
- printf "\nWARNING: unable to start monitor mode, please run \"airmon-ng check kill\"\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- if [ -f /sys/class/ieee80211/${PHYDEV}/remove_iface ]; then
|
|
|
- printf "${1}" > /sys/class/ieee80211/${PHYDEV}/remove_iface
|
|
|
- printf "\n\t\t(mac80211 monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
- else
|
|
|
- printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-stopwlIface() {
|
|
|
- if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
- if [ -r "/proc/brcm_monitor0" ]; then
|
|
|
- local brcm_monitor="$(cat /proc/brcm_monitor0)"
|
|
|
- if [ "$brcm_monitor" = "0" ]; then
|
|
|
- printf "\n\t\t(experimental wl monitor mode vif already disabled for [${PHYDEV}]${1})\n"
|
|
|
- return 0
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ -w "/proc/brcm_monitor0" ]; then
|
|
|
- printf "0" > /proc/brcm_monitor0
|
|
|
- if [ "$?" = "0" ]; then
|
|
|
- printf "\n\t\t(experimental wl monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
- else
|
|
|
- printf "\n\t\t(failed to disable experimental wl monitor mode for [${PHYDEV}${1})\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "\n\tUnable to write to /proc/brcm_monitor0, cannot disable monitor mode.\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "\n\tThis version of wl does not appear to support monitor mode.\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getDriver() {
|
|
|
- unset DRIVER
|
|
|
- #standard detection path, this is all that is needed for proper drivers
|
|
|
- #DRIVER=$(printf "$ethtool_output" | awk '/driver/ {print $2}')
|
|
|
-
|
|
|
- #if $(modinfo -F filename ${DRIVER} > /dev/null 2>&1)
|
|
|
- #then
|
|
|
- # true
|
|
|
- #else
|
|
|
- # unset DRIVER
|
|
|
- #fi
|
|
|
-
|
|
|
- #if [ "$DRIVER" = "" ]
|
|
|
- #then
|
|
|
- if [ -f /sys/class/net/$1/device/uevent ]; then
|
|
|
- DRIVER="$(awk -F'=' '$1 == "DRIVER" {print $2}' /sys/class/net/$1/device/uevent)"
|
|
|
- fi
|
|
|
- #fi
|
|
|
-
|
|
|
- #here we test for driver usb, ath9k_htc,rt2870, possibly others show this
|
|
|
- if [ "$DRIVER" = "usb" ]; then
|
|
|
- printf "Warn ON: USB\n"
|
|
|
- BUSADDR="$(printf "$ethtool_output" | awk '/bus-info/ {print $2}'):1.0"
|
|
|
-
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "${BUSADDR}\n"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -n "$BUSADDR" ]; then
|
|
|
- if [ -f /sys/class/net/$1/device/"$BUSADDR"/uevent ]; then
|
|
|
- DRIVER="$(awk -F'=' '$1 == "DRIVER" {print $2}' /sys/class/net/$1/device/$BUSADDR/uevent)"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- #here we can normalize driver names we don't like
|
|
|
- if [ "$DRIVER" = "rt2870" ]; then
|
|
|
- DRIVER="rt2870sta"
|
|
|
- fi
|
|
|
- if [ -f /sys/class/net/$1/device/idProduct ]; then
|
|
|
- if [ "$(cat /sys/class/net/$1/device/idProduct)" = "3070" ]; then
|
|
|
- DRIVER="rt3070sta"
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "rtl8187L" ]; then
|
|
|
- DRIVER="r8187l"
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "rtl8187" ] && [ "$STACK" = "ieee80211" ]; then
|
|
|
- DRIVER="r8187"
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "rtl88xxau" ]; then
|
|
|
- DRIVER="88XXau"
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "rtl8812au" ]; then
|
|
|
- DRIVER="8812au"
|
|
|
- fi
|
|
|
-
|
|
|
- #Here we will catch the broken lying drivers not caught above
|
|
|
- #currently this only functions for pci devices and not usb since lsusb has no -k option
|
|
|
- if [ "${MODINFO}" = "1" ]; then
|
|
|
- if $(modinfo -F filename $DRIVER > /dev/null 2>&1)
|
|
|
- then
|
|
|
- true
|
|
|
- else
|
|
|
- save="$DRIVER"
|
|
|
-
|
|
|
- if [ -n "${DEVICEID}" ] && [ "$BUS" = "pci" ]; then
|
|
|
- DRIVER="$(lspci -d $DEVICEID -k | awk '/modules/ {print $3}')"
|
|
|
- fi
|
|
|
- if [ -z "${BUS}" ] || [ "${BUS}" != 'sdio' ]; then
|
|
|
- unset DRIVER
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -n "$save" ] && [ -z "$DRIVER" ] ; then
|
|
|
- DRIVER="$save"
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ -z "$DRIVER" ] ; then
|
|
|
- DRIVER="??????"
|
|
|
- fi
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getdriver() $DRIVER\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getFrom() {
|
|
|
- #from detection
|
|
|
- FROM="K"
|
|
|
- if [ "${MODINFO}" = "1" ] && [ -f /proc/modules ]; then
|
|
|
- if modinfo -F filename $DRIVER 2>&1 | grep -q 'kernel/drivers'
|
|
|
- then
|
|
|
- FROM="K"
|
|
|
- #we add special handling here because we hate the vendor drivers AND they install in the wrong place
|
|
|
- if [ "$DRIVER" = "r8187" ]; then
|
|
|
- FROM="V"
|
|
|
- elif [ "$DRIVER" = "r8187l" ]; then
|
|
|
- FROM="V"
|
|
|
- elif [ "$DRIVER" = "rt5390sta" ]; then
|
|
|
- FROM="V"
|
|
|
- elif [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ]; then
|
|
|
- FROM="V"
|
|
|
- fi
|
|
|
- elif modinfo -F filename $DRIVER 2>&1 | grep -q 'updates/drivers'
|
|
|
- then
|
|
|
- FROM="C"
|
|
|
- elif modinfo -F filename $DRIVER 2>&1 | grep -q misc
|
|
|
- then
|
|
|
- FROM="V"
|
|
|
- elif modinfo -F filename $DRIVER 2>&1 | grep -q staging
|
|
|
- then
|
|
|
- FROM="S"
|
|
|
- else
|
|
|
- FROM="?"
|
|
|
- fi
|
|
|
- else
|
|
|
- FROM="K"
|
|
|
- fi
|
|
|
- #maybe add an 'intree' check?
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getFrom() $FROM\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getFirmware() {
|
|
|
- FIRMWARE="$(printf "$ethtool_output" | awk '/firmware-version/ {print $2}')"
|
|
|
- #ath9k_htc firmware is a shorter version number than most so trap and make it pretty
|
|
|
- if [ "$DRIVER" = "ath9k_htc" ]; then
|
|
|
- FIRMWARE="$FIRMWARE\t"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$FIRMWARE" = "N/A" ]; then
|
|
|
- FIRMWARE="$FIRMWARE\t"
|
|
|
- elif [ -z "$FIRMWARE" ]; then
|
|
|
- FIRMWARE="unavailable"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getFirmware $FIRMWARE\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getChipset() {
|
|
|
- #this needs cleanup, we shouldn't have multiple lines assigning chipset per bus
|
|
|
- #fix this to be one line per bus
|
|
|
- if [ -f /sys/class/net/$1/device/modalias ]; then
|
|
|
- if [ "$BUS" = "usb" ]; then
|
|
|
- if [ "${LSUSB}" = "1" ]; then
|
|
|
- BUSINFO="$(cut -d ":" -f 2 /sys/class/net/$1/device/modalias | cut -b 1-10 | sed 's/^.//;s/p/:/')"
|
|
|
- CHIPSET="$(lsusb -d "$BUSINFO" | head -n1 - | cut -f3- -d ":" | sed 's/^....//;s/ Network Connection//g;s/ Wireless Adapter//g;s/^ //')"
|
|
|
- elif [ "${LSUSB}" = "0" ]; then
|
|
|
- printf "Your system doesn't seem to support usb but we found usb hardware, please report this.\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
- #yes the below line looks insane, but broadcom appears to define all the internal buses so we have to detect them here
|
|
|
- elif [ "${BUS}" = "pci" -o "${BUS}" = "pcmcia" ] && [ "${LSPCI}" = "1" ]; then
|
|
|
- if [ -f /sys/class/net/$1/device/vendor ] && [ -f /sys/class/net/$1/device/device ]; then
|
|
|
- DEVICEID="$(cat /sys/class/net/$1/device/vendor):$(cat /sys/class/net/$1/device/device)"
|
|
|
- CHIPSET="$(lspci -d $DEVICEID | cut -f3- -d ":" | sed 's/Wireless LAN Controller //g;s/ Network Connection//g;s/ Wireless Adapter//;s/^ //')"
|
|
|
- else
|
|
|
- BUSINFO="$(printf "$ethtool_output" | grep bus-info | cut -d ":" -f "3-" | sed 's/^ //')"
|
|
|
- CHIPSET="$(lspci | grep "$BUSINFO" | head -n1 - | cut -f3- -d ":" | sed 's/Wireless LAN Controller //g;s/ Network Connection//g;s/ Wireless Adapter//;s/^ //')"
|
|
|
- DEVICEID="$(lspci -nn | grep "$BUSINFO" | grep '[[0-9][0-9][0-9][0-9]:[0-9][0-9][0-9][0-9]' -o)"
|
|
|
- fi
|
|
|
- elif [ "${BUS}" = "sdio" ]; then
|
|
|
- if [ -f /sys/class/net/$1/device/vendor ] && [ -f /sys/class/net/$1/device/device ]; then
|
|
|
- DEVICEID="$(cat /sys/class/net/$1/device/vendor):$(cat /sys/class/net/$1/device/device)"
|
|
|
- fi
|
|
|
- if [ "${DEVICEID}" = '0x02d0:0x4330' ]; then
|
|
|
- CHIPSET='Broadcom 4330'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4329' ]; then
|
|
|
- CHIPSET='Broadcom 4329'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4334' ]; then
|
|
|
- CHIPSET='Broadcom 4334'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0xa94c' ]; then
|
|
|
- CHIPSET='Broadcom 43340'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0xa94d' ]; then
|
|
|
- CHIPSET='Broadcom 43341'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4324' ]; then
|
|
|
- CHIPSET='Broadcom 43241'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4335' ]; then
|
|
|
- CHIPSET='Broadcom 4335/4339'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0xa962' ]; then
|
|
|
- CHIPSET='Broadcom 43362'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0xa9a6' ]; then
|
|
|
- CHIPSET='Broadcom 43430'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4345' ]; then
|
|
|
- CHIPSET='Broadcom 43455'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0x4354' ]; then
|
|
|
- CHIPSET='Broadcom 4354'
|
|
|
- elif [ "${DEVICEID}" = '0x02d0:0xa887' ]; then
|
|
|
- CHIPSET='Broadcom 43143'
|
|
|
- else
|
|
|
- CHIPSET="unable to detect for sdio $DEVICEID"
|
|
|
- fi
|
|
|
- else
|
|
|
- CHIPSET="Not pci, usb, or sdio"
|
|
|
- fi
|
|
|
- #we don't do a check for usb here but it is obviously only going to work for usb
|
|
|
- elif [ -f /sys/class/net/$1/device/idVendor ] && [ -f /sys/class/net/$1/device/idProduct ]; then
|
|
|
- DEVICEID="$(cat /sys/class/net/$1/device/idVendor):$(cat /sys/class/net/$1/device/idProduct)"
|
|
|
- if [ "${LSUSB}" = "1" ]; then
|
|
|
- CHIPSET="$(lsusb | grep -i "$DEVICEID" | head -n1 - | cut -f3- -d ":" | sed 's/^....//;s/ Network Connection//g;s/ Wireless Adapter//g;s/^ //')"
|
|
|
- elif [ "${LSUSB}" = "0" ]; then
|
|
|
- CHIPSET="idVendor and idProduct found on non-usb device, please report this."
|
|
|
- fi
|
|
|
- elif [ "${DRIVER}" = "mac80211_hwsim" ]; then
|
|
|
- CHIPSET="Software simulator of 802.11 radio(s) for mac80211"
|
|
|
- elif $(printf "$ethtool_output" | awk '/bus-info/ {print $2}' | grep -q bcma)
|
|
|
- then
|
|
|
- BUS="bcma"
|
|
|
-
|
|
|
- if [ "${DRIVER}" = "brcmsmac" ] || [ "${DRIVER}" = "brcmfmac" ] || [ "${DRIVER}" = "b43" ]; then
|
|
|
- CHIPSET="Broadcom on bcma bus, information limited"
|
|
|
- else
|
|
|
- CHIPSET="Unrecognized driver \"${DRIVER}\" on bcma bus"
|
|
|
- fi
|
|
|
- else
|
|
|
- CHIPSET="non-mac80211 device? (report this!)"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getchipset() $CHIPSET\n"
|
|
|
- printf "BUS = $BUS\n"
|
|
|
- printf "BUSINFO = $BUSINFO\n"
|
|
|
- printf "DEVICEID = $DEVICEID\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getBus() {
|
|
|
- if [ -f /sys/class/net/$1/device/modalias ]; then
|
|
|
- BUS="$(cut -d ":" -f 1 /sys/class/net/$1/device/modalias)"
|
|
|
- fi
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getBus $BUS\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getStack() {
|
|
|
- if [ -z "$1" ]; then
|
|
|
- return
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -d /sys/class/net/$1/phy80211/ ]; then
|
|
|
- MAC80211="1"
|
|
|
- STACK="mac80211"
|
|
|
- else
|
|
|
- MAC80211="0"
|
|
|
- STACK="ieee80211"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -e /proc/sys/dev/$1/fftxqmin ]; then
|
|
|
- MAC80211="0"
|
|
|
- STACK="net80211"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "getStack $STACK\n"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-getExtendedInfo() {
|
|
|
- #stuff rfkill info into extended if nothing else is there
|
|
|
- rfkill_check ${PHYDEV}
|
|
|
- rfkill_retcode="$?"
|
|
|
- if [ "${rfkill_retcode}" = "1" ]; then
|
|
|
- EXTENDED="rfkill soft blocked"
|
|
|
- elif [ "${rfkill_retcode}" = "2" ]; then
|
|
|
- EXTENDED="rfkill hard blocked"
|
|
|
- elif [ "${rfkill_redcode}" = "3" ]; then
|
|
|
- EXTENDED="rfkill hard and soft blocked"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DRIVER" = "??????" ]; then
|
|
|
- EXTENDED="\t Failure detecting driver properly please report"
|
|
|
- fi
|
|
|
-
|
|
|
- #first we set all the real (useful) info we can find
|
|
|
- if [ -f /sys/class/net/$1/device/product ]; then
|
|
|
- EXTENDED="\t$(cat /sys/class/net/$1/device/product)"
|
|
|
- fi
|
|
|
-
|
|
|
- #then we sweep for known broken drivers with no available better drivers
|
|
|
- if [ "$DRIVER" = "wl" ]; then
|
|
|
- if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
- EXTENDED="Experimental monitor mode support"
|
|
|
- else
|
|
|
- EXTENDED="No known monitor support, try a newer version or b43"
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "brcmsmac" ]; then
|
|
|
- EXTENDED="Driver commonly referred to as brcm80211 (no injection yet)"
|
|
|
- fi
|
|
|
- if [ "$DRIVER" = "r8712u" ]; then
|
|
|
- EXTENDED="\t\t\t\tNo monitor or injection support"
|
|
|
- fi
|
|
|
-
|
|
|
- #lastly we detect all the broken drivers which have working alternatives
|
|
|
- KV="$(uname -r | awk -F'-' '{print $1}')"
|
|
|
- KVMAJOR="$(printf ${KV} | awk -F'.' '{print $1$2}')"
|
|
|
- KVMINOR="$(printf ${KV} | awk -F'.' '{print $3}')"
|
|
|
-
|
|
|
- if [ $KVMAJOR -lt 26 ]; then
|
|
|
- printf "You are running a kernel older than 2.6, I'm surprised it didn't error before now."
|
|
|
- if [ "$DEBUG" = "1" ]; then
|
|
|
- printf "${KVMAJOR} ${KVMINOR}\n"
|
|
|
- fi
|
|
|
- exit 1
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DRIVER" = "rt2870sta" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "35" ]; then
|
|
|
- EXTENDED="\tBlacklist rt2870sta and use rt2800usb"
|
|
|
- else
|
|
|
- EXTENDED="\tUpgrade to kernel 2.6.35 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- #add in a flag for "did you tell use to do X" and emit instructions
|
|
|
- elif [ "$DRIVER" = "rt3070sta" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "35" ]; then
|
|
|
- EXTENDED="\tBlacklist rt3070sta and use rt2800usb"
|
|
|
- else
|
|
|
- EXTENDED="\tUpgrade to kernel 2.6.35 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- elif [ "$DRIVER" = "rt5390sta" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "39" ]; then
|
|
|
- EXTENDED="\tBlacklist rt5390sta and use rt2800usb"
|
|
|
- else
|
|
|
- EXTENDED="\tUpgrade to kernel 2.6.39 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- elif [ "$DRIVER" = "ar9170usb" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "37" ]; then
|
|
|
- EXTENDED="\tBlacklist ar9170usb and use carl9170"
|
|
|
- else
|
|
|
- EXTENDED="\tUpgrade to kernel 2.6.37 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- elif [ "$DRIVER" = "arusb_lnx" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "37" ]; then
|
|
|
- EXTENDED="\tBlacklist arusb_lnx and use carl9170"
|
|
|
- else
|
|
|
- EXTENDED="\tUpgrade to kernel 2.6.37 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- elif [ "$DRIVER" = "r8187" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "29" ]; then
|
|
|
- EXTENDED="\t\tBlacklist r8187 and use rtl8187 from the kernel"
|
|
|
- else
|
|
|
- EXTENDED="\t\tUpgrade to kernel 2.6.29 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- elif [ "$DRIVER" = "r8187l" ]; then
|
|
|
- if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "29" ]; then
|
|
|
- EXTENDED="\t\tBlacklist r8187l and use rtl8187 from the kernel"
|
|
|
- else
|
|
|
- EXTENDED="\t\tUpgrade to kernel 2.6.29 or install compat-wireless stable"
|
|
|
- fi
|
|
|
- fi
|
|
|
- #okay, now I take overload to a new level
|
|
|
- #if there is nothing else here to complain about, show mode
|
|
|
- if [ -z "${EXTENDED}" ]; then
|
|
|
- if [ -r "/sys/class/net/${1}/type" ]; then
|
|
|
- NET_TYPE="$(cat /sys/class/net/${1}/type)"
|
|
|
- elif [ -r "/sys/class/ieee80211/${PHYDEV}/device/net/${1}/type" ]; then
|
|
|
- NET_TYPE="$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${1}/type)"
|
|
|
- fi
|
|
|
- if [ -n "${NET_TYPE}" ]; then
|
|
|
- if [ "${NET_TYPE}" = "803" ]; then
|
|
|
- EXTENDED="mode monitor"
|
|
|
- elif [ "${NET_TYPE}" = "1" ]; then
|
|
|
- EXTENDED="mode managed"
|
|
|
- else
|
|
|
- EXTENDED="mode ${NET_TYPE} unknown"
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-scanProcesses() {
|
|
|
- #this test means it errored and said it was busybox since busybox doesn't print without error
|
|
|
- if (ps -A 2>&1 | grep -q BusyBox)
|
|
|
- then
|
|
|
- #busybox in openwrt cannot handle -A but its output by default is -A
|
|
|
- psopts=""
|
|
|
- else
|
|
|
- psopts="-A"
|
|
|
- fi
|
|
|
- if ( ps -o comm= 2>&1 | grep -q BusyBox )
|
|
|
- then
|
|
|
- #busybox in openwrt cannot handle -o
|
|
|
- pso="0"
|
|
|
- else
|
|
|
- pso="1"
|
|
|
- fi
|
|
|
-
|
|
|
- PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|dhcpcd\|udhcpc\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon\|wlassistant\|wifibox"
|
|
|
- #PS_ERROR="invalid\|illegal"
|
|
|
-
|
|
|
- if [ -x "$(command -v service 2>&1)" ] && [ "$1" = "kill" ]; then
|
|
|
- service network-manager stop 2> /dev/null > /dev/null
|
|
|
- service NetworkManager stop 2> /dev/null > /dev/null
|
|
|
- service avahi-daemon stop 2> /dev/null > /dev/null
|
|
|
- fi
|
|
|
-
|
|
|
- unset match
|
|
|
- if [ "${pso}" = 1 ]; then
|
|
|
- match="$(ps ${psopts} -o comm= | grep ${PROCESSES} | grep -v grep | wc -l)"
|
|
|
- elif [ "${pso}" = 0 ]; then
|
|
|
- #openwrt busybox grep hits on itself so we -v it out
|
|
|
- match="$(ps ${psopts} | grep ${PROCESSES} | grep -v grep | wc -l)"
|
|
|
- fi
|
|
|
- if [ ${match} -gt 0 ] && [ "${1}" != "kill" ]; then
|
|
|
- printf "Found $match processes that could cause trouble.\n"
|
|
|
- printf "Kill them using 'airmon-ng check kill' before putting\n"
|
|
|
- printf "the card in monitor mode, they will interfere by changing channels\n"
|
|
|
- printf "and sometimes putting the interface back in managed mode\n\n"
|
|
|
- else
|
|
|
- if [ "${1}" != "kill" ] && [ -n "${1}" ]; then
|
|
|
- printf "No interfering processes found\n"
|
|
|
- return
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- if [ ${match} -gt 0 ]; then
|
|
|
- if [ "${1}" = "kill" ]; then
|
|
|
- printf "Killing these processes:\n\n"
|
|
|
- fi
|
|
|
- if [ "${pso}" = "1" ]; then
|
|
|
- ps ${psopts} -o pid=PID -o comm=Name | grep "${PROCESSES}\|PID"
|
|
|
- else
|
|
|
- #openwrt busybox grep hits on itself so we -v it out
|
|
|
- ps ${psopts} | grep "${PROCESSES}\|PID | grep -v grep"
|
|
|
- fi
|
|
|
- if [ "${1}" = "kill" ]; then
|
|
|
- #we have to use signal 9 because things like nm actually respawn wpa_supplicant too quickly
|
|
|
- if [ "${pso}" = "1" ]; then
|
|
|
- for pid in $(ps ${psopts} -o pid= -o comm= | grep ${PROCESSES} | awk '{print $1}'); do
|
|
|
- kill -9 ${pid}
|
|
|
- done
|
|
|
- else
|
|
|
- #openwrt busybox grep hits on itself so we -v it out
|
|
|
- for pid in $(ps ${psopts} | grep ${PROCESSES} | grep -v grep | awk '{print $1}'); do
|
|
|
- kill -9 ${pid}
|
|
|
- done
|
|
|
- fi
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- #i=1
|
|
|
- #while [ $i -le $match ]
|
|
|
- #do
|
|
|
- # pid=$(ps ${psopts} -o pid= -o comm= | grep $PROCESSES | head -n $i | tail -n 1 | awk '{print $1}')
|
|
|
- # pname=$(ps ${psopts} -o pid= -o comm= | grep $PROCESSES | head -n $i | tail -n 1 | awk '{print $2}')
|
|
|
- # if [ x"$1" != "xkill" ]
|
|
|
- # then
|
|
|
- # printf "${pid}\t${pname}\n"
|
|
|
- # else
|
|
|
- # kill ${pid}
|
|
|
- # fi
|
|
|
- # i=$(($i+1))
|
|
|
- #done
|
|
|
-
|
|
|
- printf "\n"
|
|
|
-
|
|
|
- #this stub is for checking against the interface name, but since it almost never hits why bother?
|
|
|
- #if [ x"${1}" != "x" -a x"${1}" != "xkill" ]
|
|
|
- #then
|
|
|
- # #the next line doesn't work on busybox ps because -p is unimplimented
|
|
|
- # match2=$(ps -o comm= -p 1 2>&1 | grep $PS_ERROR -c)
|
|
|
- # if [ ${match2} -gt 0 ]
|
|
|
- # then
|
|
|
- # return
|
|
|
- # fi
|
|
|
- #
|
|
|
- # for i in $(ps auxw | grep ${1} | grep -v "grep" | grep -v "airmon-ng" | awk '{print $2}')
|
|
|
- # do
|
|
|
- # pname=$(ps -o comm= -p ${i})
|
|
|
- # printf "Process with PID ${i} ($pname) is running on interface ${1}\n"
|
|
|
- # done
|
|
|
- #fi
|
|
|
-}
|
|
|
-
|
|
|
-listInterfaces() {
|
|
|
- unset iface_list
|
|
|
- for iface in $(ls -1 /sys/class/net)
|
|
|
- do
|
|
|
- if [ -f /sys/class/net/${iface}/uevent ]; then
|
|
|
- if $(grep -q DEVTYPE=wlan /sys/class/net/${iface}/uevent)
|
|
|
- then
|
|
|
- iface_list="${iface_list}\n ${iface}"
|
|
|
- fi
|
|
|
- fi
|
|
|
- done
|
|
|
-
|
|
|
- # this block only adds garbage to me
|
|
|
- #if [ -x "$(command -v iwconfig 2>&1)" ] && [ -x "$(command -v sort 2>&1)" ]; then
|
|
|
- # for iface in $(iwconfig 2> /dev/null | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/'); do
|
|
|
- # iface_list="${iface_list}\n ${iface}"
|
|
|
- # done
|
|
|
- # iface_list="$(printf "${iface_list}" | sort -bu)"
|
|
|
- #fi
|
|
|
-}
|
|
|
-
|
|
|
-getPhy() {
|
|
|
- if [ -z "$1" ]; then
|
|
|
- return
|
|
|
- fi
|
|
|
-
|
|
|
- if [ $MAC80211 = "0" ]; then
|
|
|
- PHYDEV="null"
|
|
|
- return
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -r /sys/class/net/$1/phy80211/name ]; then
|
|
|
- PHYDEV="$(cat /sys/class/net/$1/phy80211/name)"
|
|
|
- fi
|
|
|
- if [ -d /sys/class/net/$1/phy80211/ ] && [ -z "${PHYDEV}" ]; then
|
|
|
-
|
|
|
- PHYDEV="$(ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/')"
|
|
|
- fi
|
|
|
-}
|
|
|
-
|
|
|
-checkvm() {
|
|
|
- #this entire section of code is completely stolen from Carlos Perez's work in checkvm.rb for metasploit and rewritten (poorly) in sh
|
|
|
- #check loaded modules
|
|
|
- if [ -x "$(command -v lsmod 2>&1)" ]; then
|
|
|
- lsmod_data="$(lsmod 2>&1 | awk '{print $1}')"
|
|
|
- if [ -n "${lsmod}" ]; then
|
|
|
- printf "${lsmod_data}" | grep -iqE "vboxsf|vboxguest" 2> /dev/null && vm="VirtualBox"
|
|
|
- printf "${lsmod_data}" | grep -iqE "vmw_ballon|vmxnet|vmw" 2> /dev/null && vm="VMware"
|
|
|
- printf "${lsmod_data}" | grep -iqE "xen-vbd|xen-vnif" 2> /dev/null && vm="Xen"
|
|
|
- printf "${lsmod_data}" | grep -iqE "virtio_pci|virtio_net" 2> /dev/null && vm="Qemu/KVM"
|
|
|
- printf "${lsmod_data}" | grep -iqE "hv_vmbus|hv_blkvsc|hv_netvsc|hv_utils|hv_storvsc" && vm="MS Hyper-V"
|
|
|
- [ -n "${vm}" ] && vm_from="lsmod"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- #check scsi driver
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -r /proc/scsi/scsi ]; then
|
|
|
- grep -iq "vmware" /proc/scsi/scsi 2> /dev/null && vm="VMware"
|
|
|
- grep -iq "vbox" /proc/scsi/scsi 2> /dev/null && vm="VirtualBox"
|
|
|
- [ -n "${vm}" ] && vm_from="/pro/scsi/scsi"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- # Check IDE Devices
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -d /proc/ide ]; then
|
|
|
- ide_model="$(cat /proc/ide/hd*/model)"
|
|
|
- printf "${ide_model}" | grep -iq "vbox" 2> /dev/null && vm="VirtualBox"
|
|
|
- printf "${ide_model}" | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
- printf "${ide_model}" | grep -iq "qemu" 2> /dev/null && vm="Qemu/KVM"
|
|
|
- printf "${ide_model}" | grep -iqE "virtual (hd|cd)" 2> /dev/null && vm="Hyper-V/Virtual PC"
|
|
|
- [ -n "${vm}" ] && vm_from="ide_model"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- # Check using lspci
|
|
|
- if [ -z "${vm_from}" ] && [ "${LSPCI}" = "1" ]; then
|
|
|
- lspci_data="$(lspci 2>&1)"
|
|
|
- printf "${lspci_data}" | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
- printf "${lspci_data}" | grep -iq "virtualbox" 2> /dev/null && vm="VirtualBox"
|
|
|
- [ -n "${vm}" ] && vm_from="lspci"
|
|
|
- fi
|
|
|
-
|
|
|
- # Xen bus check
|
|
|
- ## XXX: Removing unsafe check
|
|
|
- # this check triggers if CONFIG_XEN_PRIVILEGED_GUEST=y et al are set in kconfig (debian default) even in not actually a guest
|
|
|
- #if [ -z ${vm} ]
|
|
|
- #then
|
|
|
- # ls -1 /sys/bus | grep -iq "xen" 2> /dev/null && vm="Xen"
|
|
|
- # vm_from="/sys/bus/xen"
|
|
|
- #fi
|
|
|
-
|
|
|
- # Check using lscpu
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -x "$(command -v lscpu 2>&1)" ]; then
|
|
|
- lscpu_data="$(lscpu 2>&1)"
|
|
|
- printf "${lscpu_data}" | grep -iq "Xen" 2> /dev/null && vm="Xen"
|
|
|
- printf "${lscpu_data}" | grep -iq "KVM" 2> /dev/null && vm="KVM"
|
|
|
- printf "${lscpu_data}" | grep -iq "Microsoft" 2> /dev/null && vm="MS Hyper-V"
|
|
|
- [ -n "${vm}" ] && vm_from="lscpu"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- #Check vmnet
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -e /dev/vmnet ]; then
|
|
|
- vm="VMware"
|
|
|
- vm_from="/dev/vmnet"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- #Check dmi info
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -x "$(command -v dmidecode 2>&1)" ]; then
|
|
|
- dmidecode 2>&1 | grep -iq "microsoft corporation" 2> /dev/null && vm="MS Hyper-V"
|
|
|
- dmidecode 2>&1 | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
- dmidecode 2>&1 | grep -iq "virtualbox" 2> /dev/null && vm="VirtualBox"
|
|
|
- dmidecode 2>&1 | grep -iq "qemu" 2> /dev/null && vm="Qemu/KVM"
|
|
|
- dmidecode 2>&1 | grep -iq "domu" 2> /dev/null && vm="Xen"
|
|
|
- [ -n "${vm}" ] && vm_from="dmi_info"
|
|
|
- fi
|
|
|
- fi
|
|
|
-
|
|
|
- # Check dmesg Output
|
|
|
- if [ -z "${vm_from}" ]; then
|
|
|
- if [ -x "$(command -v dmesg 2>&1)" ]; then
|
|
|
- dmesg | grep -iqE "vboxbios|vboxcput|vboxfacp|vboxxsdt|(vbox cd-rom)|(vbox harddisk)" && vm="VirtualBox"
|
|
|
- dmesg | grep -iqE "(vmware virtual ide)|(vmware pvscsi)|(vmware virtual platform)" && vm="VMware"
|
|
|
- dmesg | grep -iqE "(xen_mem)|(xen-vbd)" && vm="Xen"
|
|
|
- dmesg | grep -iqE "(qemu virtual cpu version)" && vm="Qemu/KVM"
|
|
|
- [ -n "${vm}" ] && vm_from="dmesg"
|
|
|
- fi
|
|
|
- fi
|
|
|
- checkvm_status="run"
|
|
|
-}
|
|
|
-
|
|
|
-#end function definitions
|
|
|
-#begin execution
|
|
|
-
|
|
|
-#here we check for any phys that have no interfaces to pick up The Lost Phys
|
|
|
-handleLostPhys
|
|
|
-
|
|
|
-listInterfaces
|
|
|
-
|
|
|
-if [ "${1}" = "check" ] || [ "${1}" = "start" ]; then
|
|
|
- if [ "${2}" = "kill" ]; then
|
|
|
- #if we are killing, tell scanProcesses that
|
|
|
- scanProcesses "${2}"
|
|
|
- exit
|
|
|
- elif [ "${1}" = "start" ]; then
|
|
|
- #this stub can send scanProcesses the interface name
|
|
|
- #but this seems entirely unreliable so just run generic
|
|
|
- #scanProcesses "${2}"
|
|
|
- scanProcesses
|
|
|
- else
|
|
|
- scanProcesses
|
|
|
- exit
|
|
|
- fi
|
|
|
-fi
|
|
|
-
|
|
|
-if [ "$#" != "0" ]; then
|
|
|
- if [ "$1" != "start" ] && [ "$1" != "stop" ]; then
|
|
|
- usage
|
|
|
- fi
|
|
|
-
|
|
|
- if [ -z "$2" ]; then
|
|
|
- usage
|
|
|
- fi
|
|
|
-fi
|
|
|
-
|
|
|
-#startup checks complete, headers then main
|
|
|
-
|
|
|
-if [ "$DEBUG" = "1" ]; then
|
|
|
- if [ -x "$(command -v readlink 2>&1)" ]; then
|
|
|
- printf "/bin/sh -> $(readlink -f /bin/sh)\n"
|
|
|
- if $(readlink -f /bin/sh) --version > /dev/null 2>&1
|
|
|
- then
|
|
|
- printf "$($(readlink -f /bin/sh) --version)\n"
|
|
|
- fi
|
|
|
- else
|
|
|
- ls -l /bin/sh
|
|
|
- if /bin/sh --version > /dev/null 2>&1
|
|
|
- then
|
|
|
- /bin/sh --version
|
|
|
- fi
|
|
|
- fi
|
|
|
- if [ -n "$SHELL" ]; then
|
|
|
- if $SHELL --version > /dev/null 2>&1
|
|
|
- then
|
|
|
- printf "\nSHELL is $($SHELL --version)\n\n"
|
|
|
- else
|
|
|
- printf "\nSHELL is $SHELL\n\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
-fi
|
|
|
-if [ "$VERBOSE" = "1" ]; then
|
|
|
- if [ -n "$(command -v lsb_release 2> /dev/null)" ]; then
|
|
|
- lsb_release -a
|
|
|
- printf "\n"
|
|
|
- fi
|
|
|
- uname -a
|
|
|
-
|
|
|
- checkvm
|
|
|
- if [ -n "${vm}" ]; then
|
|
|
- printf "Detected VM using ${vm_from}\n"
|
|
|
- printf "This appears to be a ${vm} Virtual Machine\n"
|
|
|
- printf "If your system supports VT-d, it may be possible to use PCI devices\n"
|
|
|
- printf "If your system does not support VT-d, you can only use USB wifi cards\n"
|
|
|
- fi
|
|
|
-
|
|
|
- printf "\nK indicates driver is from $(uname -r)\n"
|
|
|
- if [ "${MODPROBE}" = "1" ]; then
|
|
|
- modprobe compat > /dev/null 2>&1
|
|
|
-
|
|
|
- if [ -r /sys/module/compat/parameters/compat_version ]; then
|
|
|
- printf "C indicates driver is from $(cat /sys/module/compat/parameters/compat_version)\n"
|
|
|
- fi
|
|
|
- fi
|
|
|
- printf "V indicates driver comes directly from the vendor, almost certainly a bad thing\n"
|
|
|
- printf "S indicates driver comes from the staging tree, these drivers are meant for reference not actual use, BEWARE\n"
|
|
|
- printf "? indicates we do not know where the driver comes from... report this\n\n"
|
|
|
-fi
|
|
|
-
|
|
|
-if [ "${VERBOSE}" = "1" ]; then
|
|
|
- printf "\nX[PHY]Interface\t\tDriver[Stack]-FirmwareRev\t\tChipset\t\t\t\t\t\t\t\t\t\tExtended Info\n\n"
|
|
|
-else
|
|
|
- printf "PHY\tInterface\tDriver\t\tChipset\n\n"
|
|
|
-fi
|
|
|
-
|
|
|
-#this whole block of code shouldn't be here, it makes no sense
|
|
|
-#per shellcheck, this block is broken as it runs the loops once with iface=listIfaceUnspec instead of the output of listIFaceUnspec
|
|
|
-#for iface in listIfaceUnspec; do
|
|
|
-#
|
|
|
-# if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
|
|
|
-# then
|
|
|
-# setLink ${iface} up
|
|
|
-# printf "$iface\t\tAtheros\t\tmadwifi-ng"
|
|
|
-# if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
|
|
|
-# then
|
|
|
-# IFACE=$(wlanconfig ath create wlandev $iface wlanmode monitor -bssid | grep ath)
|
|
|
-# setLink ${iface} up
|
|
|
-# if [ $CH -lt 1000 ]
|
|
|
-# then
|
|
|
-# iwconfig $IFACE channel $CH 2> /dev/null > /dev/null
|
|
|
-# else
|
|
|
-# iwconfig $IFACE freq "$CH"000000 2> /dev/null > /dev/null
|
|
|
-# fi
|
|
|
-# setLink ${IFACE} up
|
|
|
-# UDEV_ISSUE=$?
|
|
|
-# fi
|
|
|
-#
|
|
|
-# if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
|
|
|
-# then
|
|
|
-# printf "$iface does not support 'stop', do it on ath interface\n"
|
|
|
-# fi
|
|
|
-#
|
|
|
-# #why, dear god why is there a random newline here?
|
|
|
-# printf "\n"
|
|
|
-# sleep 1
|
|
|
-# continue
|
|
|
-# fi
|
|
|
-#done
|
|
|
-#end random block of code that needs to die
|
|
|
-
|
|
|
-for iface in $(printf "${iface_list}"); do
|
|
|
- unset ethtool_output DRIVER FROM FIRMWARE STACK MADWIFI MAC80211 BUS BUSADDR BUSINFO DEVICEID CHIPSET EXTENDED NET_TYPE PHYDEV ifacet DRIVERt FIELD1 FIELD1t FIELD2 FIELD2t CHIPSETt
|
|
|
- #add a RUNNING check here and up the device if it isn't already
|
|
|
- ethtool_output="$(ethtool -i $iface 2>&1)"
|
|
|
- if [ "$ethtool_output" != "Cannot get driver information: Operation not supported" ]; then
|
|
|
- getStack ${iface}
|
|
|
- getBus ${iface}
|
|
|
- getPhy ${iface}
|
|
|
- getDriver ${iface}
|
|
|
- getChipset ${iface}
|
|
|
- if [ "${VERBOSE}" = "1" ]; then
|
|
|
- getFrom ${iface}
|
|
|
- getFirmware ${iface}
|
|
|
- getExtendedInfo ${iface}
|
|
|
- fi
|
|
|
- else
|
|
|
- printf "\nethtool failed...\n"
|
|
|
- printf "Only mac80211 devices on kernel 2.6.33 or higher are officially supported by airmon-ng.\n"
|
|
|
- exit 1
|
|
|
- fi
|
|
|
-
|
|
|
- #yes this really is the main output loop
|
|
|
- if [ "${VERBOSE}" = "1" ]; then
|
|
|
- #beautify output spacing (within reason)
|
|
|
- FIELD1="${FROM}[${PHYDEV}]${iface}"
|
|
|
- if [ ${#FIELD1} -gt 15 ]; then
|
|
|
- FIELD1t="\t"
|
|
|
- else
|
|
|
- FIELD1t="\t\t"
|
|
|
- fi
|
|
|
- FIELD2="${DRIVER}[${STACK}]-${FIRMWARE}"
|
|
|
- if [ ${#FIELD2} -gt 28 ]; then
|
|
|
- FIELD2t="\t"
|
|
|
- else
|
|
|
- FIELD2t="\t\t"
|
|
|
- fi
|
|
|
- if [ -n "${EXTENDED}" ]; then
|
|
|
- if [ ${#CHIPSET} -gt 70 ]; then
|
|
|
- CHIPSETt="\t"
|
|
|
- elif [ ${#CHIPSET} -gt 63 ]; then
|
|
|
- CHIPSETt="\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 56 ]; then
|
|
|
- CHIPSETt="\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 49 ]; then
|
|
|
- CHIPSETt="\t\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 39 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 35 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t\t"
|
|
|
- # XXX YUP, 28 and 21 are now that same. mostly because this is all hardcoded and sucks
|
|
|
- elif [ ${#CHIPSET} -gt 28 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 21 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 14 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t\t\t\t"
|
|
|
- elif [ ${#CHIPSET} -gt 7 ]; then
|
|
|
- CHIPSETt="\t\t\t\t\t\t\t\t\t"
|
|
|
- else
|
|
|
- CHIPSETt="\t\t\t\t\t\t\t\t\t\t"
|
|
|
- fi
|
|
|
- fi
|
|
|
- printf "${FROM}[${PHYDEV}]${iface}${FIELD1t}${DRIVER}[${STACK}]-${FIRMWARE}${FIELD2t}${CHIPSET}${CHIPSETt}${EXTENDED}\n"
|
|
|
- else
|
|
|
- #beautify output spacing (within reason, interface/driver max length is 15 and phy max length is 7))
|
|
|
- if [ ${#DRIVER} -gt 7 ]; then
|
|
|
- DRIVERt="\t"
|
|
|
- else
|
|
|
- DRIVERt="\t\t"
|
|
|
- fi
|
|
|
- if [ ${#iface} -gt 7 ]; then
|
|
|
- ifacet="\t"
|
|
|
- else
|
|
|
- ifacet="\t\t"
|
|
|
- fi
|
|
|
- printf "${PHYDEV}\t${iface}${ifacet}${DRIVER}${DRIVERt}${CHIPSET}\n"
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$DRIVER" = "wl" ]; then
|
|
|
- if [ "$1" = "start" ] && [ "$2" = "$iface" ]; then
|
|
|
- startwlIface $iface
|
|
|
- fi
|
|
|
- if [ "$1" = "stop" ] && [ "$2" = "$iface" ]; then
|
|
|
- stopwlIface $iface
|
|
|
- fi
|
|
|
- elif [ "$MAC80211" = "1" ]; then
|
|
|
- if [ "$1" = "start" ] && [ "$2" = "$iface" ]; then
|
|
|
- startMac80211Iface $iface
|
|
|
- fi
|
|
|
-
|
|
|
- if [ "$1" = "stop" ] && [ "$2" = "$iface" ]; then
|
|
|
- stopMac80211Iface $iface
|
|
|
- fi
|
|
|
- fi
|
|
|
-done
|
|
|
-
|
|
|
-#end with some space
|
|
|
-printf "\n"
|
|
|
+#!/bin/sh
|
|
|
+DEBUG="0"
|
|
|
+VERBOSE="0"
|
|
|
+ELITE="0"
|
|
|
+USERID=""
|
|
|
+IFACE=""
|
|
|
+checkvm_status=""
|
|
|
+MAC80211=0
|
|
|
+IW_SOURCE="https://mirrors.edge.kernel.org/pub/software/network/iw/iw-5.0.1.tar.gz"
|
|
|
+IW_ERROR=""
|
|
|
+if [ ! -d /sys/ ]; then
|
|
|
+ printf "CONFIG_SYSFS is disabled in your kernel, this program will almost certainly not work.\n"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ "${1}" = "--elite" ]; then
|
|
|
+ shift
|
|
|
+ ELITE="1"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ "${1}" = "--verbose" ]; then
|
|
|
+ shift
|
|
|
+ VERBOSE="1"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ "${1}" = "--debug" ]; then
|
|
|
+ shift
|
|
|
+ DEBUG="1"
|
|
|
+ VERBOSE="1"
|
|
|
+fi
|
|
|
+
|
|
|
+#yes, I know this is in here twice
|
|
|
+if [ "${1}" = "--elite" ]; then
|
|
|
+ shift
|
|
|
+ ELITE="1"
|
|
|
+fi
|
|
|
+
|
|
|
+
|
|
|
+if [ -n "${3}" ];then
|
|
|
+ if [ "${3}" -gt 0 ] > /dev/null 2>&1; then
|
|
|
+ CH="${3}"
|
|
|
+ else
|
|
|
+ printf "\nYou have entered an invalid channel \"${3}\" which will be ignored\n"
|
|
|
+ CH=3
|
|
|
+ fi
|
|
|
+else
|
|
|
+ CH=10
|
|
|
+fi
|
|
|
+
|
|
|
+#TODO LIST
|
|
|
+
|
|
|
+#cleanup getDriver()
|
|
|
+#fix to not assume wifi drivers are modules
|
|
|
+#rewrite to not have two devices at any one time
|
|
|
+
|
|
|
+if [ -n "$(command -v id 2> /dev/null)" ]; then
|
|
|
+ USERID="$(id -u 2> /dev/null)"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ -z "${USERID}" ] && [ -n "$(id -ru)" ]; then
|
|
|
+ USERID="$(id -ru)"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ -n "${USERID}" ] && [ "${USERID}" != "0" ]; then
|
|
|
+ printf "Run it as root\n" ; exit 1;
|
|
|
+elif [ -z "${USERID}" ]; then
|
|
|
+ printf "Unable to determine user id, permission errors may occur.\n"
|
|
|
+fi
|
|
|
+
|
|
|
+#check for all needed binaries
|
|
|
+if [ ! -x "$(command -v uname 2>&1)" ]; then
|
|
|
+ printf "How in the world do you not have uname installed?\n"
|
|
|
+ printf "Please select a linux distro which has at least basic functionality (or install uname).\n"
|
|
|
+ exit 1
|
|
|
+else
|
|
|
+ OS=$(uname -s)
|
|
|
+ #Recognized values are Linux and Darwin
|
|
|
+fi
|
|
|
+
|
|
|
+if [ ! -x "$(command -v ip 2>&1)" ] && [ ! -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
+ printf "You have neither ip (iproute2) nor ifconfig installed.\n"
|
|
|
+ printf "Please install one of them from your distro's package manager.\n"
|
|
|
+ exit 1
|
|
|
+fi
|
|
|
+
|
|
|
+if [ ! -x "$(command -v iw 2>&1)" ]; then
|
|
|
+ printf "You don't have iw installed, please install it from your distro's package manager.\n"
|
|
|
+ printf "If your distro doesn't have a recent version you can download it from this link:\n"
|
|
|
+ printf "${IW_SOURCE}\n"
|
|
|
+ exit 1
|
|
|
+fi
|
|
|
+
|
|
|
+if [ ! -x "$(command -v ethtool 2>&1)" ]; then
|
|
|
+ printf "Please install the ethtool package for your distro.\n"
|
|
|
+ exit 1
|
|
|
+fi
|
|
|
+
|
|
|
+if [ -d /sys/bus/usb ]; then
|
|
|
+ if [ ! -x "$(command -v lsusb 2>&1)" ]; then
|
|
|
+ printf "Please install lsusb from your distro's package manager.\n"
|
|
|
+ exit 1
|
|
|
+ else
|
|
|
+ LSUSB=1
|
|
|
+ fi
|
|
|
+else
|
|
|
+ LSUSB=0
|
|
|
+fi
|
|
|
+
|
|
|
+LSPCI=0
|
|
|
+# if [ -d /sys/bus/pci ] || [ -d /sys/bus/pci_express ] || [ -d /proc/bus/pci ]; then
|
|
|
+# PCI_DEVICES=0
|
|
|
+# if [ -d /sys/bus/pci/devices ] && [ "$(ls -1 /sys/bus/pci/devices 2>/dev/null | wc -l)" != '0' ]; then
|
|
|
+# PCI_DEVICES=1
|
|
|
+# elif [ -r /proc/bus/pci/devices ] && [ -n "$(cat /proc/bus/pci/devices 2>/dev/null)" ]; then
|
|
|
+# PCI_DEVICES=1
|
|
|
+# elif [ -d /sys/bus/pci_express/devices ] && [ -n "$(ls -1 /sys/bus/pci_express/devices 2>/dev/null | wc -l)" != '0' ]; then
|
|
|
+# PCI_DEVICES=1
|
|
|
+# fi
|
|
|
+
|
|
|
+# if [ ${PCI_DEVICES} -eq 0 ]; then
|
|
|
+# LSPCI=0
|
|
|
+# elif [ ! -x "$(command -v lspci 2>&1)" ]; then
|
|
|
+# printf "Please install lspci from your distro's package manager.\n"
|
|
|
+# exit 1
|
|
|
+# else
|
|
|
+# LSPCI=1
|
|
|
+# fi
|
|
|
+# else
|
|
|
+# LSPCI=0
|
|
|
+# fi
|
|
|
+
|
|
|
+if [ -f /proc/modules ] || [ -d /sys/module ]; then
|
|
|
+ if [ ! -x "$(command -v modprobe 2>&1)" ]; then
|
|
|
+ printf "Your kernel has module support but you don't have modprobe installed.\n"
|
|
|
+ printf "It is highly recommended to install modprobe (typically from kmod).\n"
|
|
|
+ MODPROBE=0
|
|
|
+ else
|
|
|
+ MODPROBE=1
|
|
|
+ fi
|
|
|
+ if [ ! -x "$(command -v modinfo 2>&1)" ]; then
|
|
|
+ printf "Your kernel has module support but you don't have modinfo installed.\n"
|
|
|
+ printf "It is highly recommended to install modinfo (typically from kmod).\n"
|
|
|
+ printf "Warning: driver detection without modinfo may yield inaccurate results.\n"
|
|
|
+ MODINFO=0
|
|
|
+ else
|
|
|
+ MODINFO=1
|
|
|
+ fi
|
|
|
+else
|
|
|
+ MODINFO=0
|
|
|
+fi
|
|
|
+
|
|
|
+if [ -c /dev/rfkill ]; then
|
|
|
+ if [ ! -x "$(command -v rfkill 2>&1)" ];then
|
|
|
+ printf "Your kernel supports rfkill but you don't have rfkill installed.\n"
|
|
|
+ printf "To ensure devices are unblocked you must install rfkill.\n"
|
|
|
+ RFKILL=0
|
|
|
+ else
|
|
|
+ RFKILL=1
|
|
|
+ fi
|
|
|
+else
|
|
|
+ RFKILL=0
|
|
|
+fi
|
|
|
+
|
|
|
+if [ ! -x "$(command -v awk 2>&1)" ]; then
|
|
|
+ printf "How in the world do you not have awk installed?\n"
|
|
|
+ printf "Please select a linux distro which has at least basic functionality (or install awk).\n"
|
|
|
+ exit 1
|
|
|
+fi
|
|
|
+
|
|
|
+if [ ! -x "$(command -v grep 2>&1)" ]; then
|
|
|
+ printf "How in the world do you not have grep installed?\n"
|
|
|
+ printf "Please select a linux distro which has at least basic functionality (or install grep).\n"
|
|
|
+ exit 1
|
|
|
+fi
|
|
|
+#done checking for binaries
|
|
|
+
|
|
|
+usage() {
|
|
|
+ printf "usage: $(basename $0) <start|stop|check> <interface> [channel or frequency]\n\n"
|
|
|
+ exit 0
|
|
|
+}
|
|
|
+
|
|
|
+handleLostPhys() {
|
|
|
+ MISSING_INTERFACE=""
|
|
|
+ if [ -d /sys/class/ieee80211 ]; then
|
|
|
+ for i in $(ls /sys/class/ieee80211/); do
|
|
|
+ if [ ! -d /sys/class/ieee80211/${i}/device/net ]; then
|
|
|
+ MISSING_INTERFACE="${i}"
|
|
|
+ printf "\nFound ${MISSING_INTERFACE} with no interfaces assigned, would you like to assign one to it? [y/n] "
|
|
|
+ yesorno
|
|
|
+ retcode=$?
|
|
|
+ if [ "${retcode}" = "1" ]; then
|
|
|
+ printf "PHY ${MISSING_INTERFACE} will remain lost.\n"
|
|
|
+ elif [ "${retcode}" = "0" ]; then
|
|
|
+ PHYDEV=${MISSING_INTERFACE}
|
|
|
+ findFreeInterface monitor
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ fi
|
|
|
+ #add some spacing so this doesn't make the display hard to read
|
|
|
+ printf "\n"
|
|
|
+}
|
|
|
+
|
|
|
+findFreeInterface() {
|
|
|
+ if [ -z "${1}" ]; then
|
|
|
+ printf "findFreeInterface needs a target mode.\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ if [ "${1}" != "monitor" ] && [ "${1}" != "station" ]; then
|
|
|
+ printf "findFreeInterface only supports monitor and station for target mode.\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ target_mode="${1}"
|
|
|
+ if [ "$target_mode" = "monitor" ]; then
|
|
|
+ target_suffix="mon"
|
|
|
+ target_type="803"
|
|
|
+ else
|
|
|
+ target_suffix=""
|
|
|
+ target_type="1"
|
|
|
+ fi
|
|
|
+ for i in $(seq 0 100); do
|
|
|
+ if [ "$i" = "100" ]; then
|
|
|
+ printf "\n\tUnable to find a free name between wlan0 and wlan99, you are on your own from here.\n"
|
|
|
+ return 1
|
|
|
+ fi
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "\nChecking candidate wlan${i}\n"
|
|
|
+ fi
|
|
|
+ if [ ! -e /sys/class/net/wlan${i} ]; then
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "\nCandidate wlan${i} is not in use\n"
|
|
|
+ fi
|
|
|
+ if [ ! -e /sys/class/net/wlan${i}mon ]; then
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "\nCandidate wlan${i} and wlan${i}mon are both clear, creating wlan${i}${target_suffix}\n"
|
|
|
+ fi
|
|
|
+ IW_ERROR="$(iw phy ${PHYDEV} interface add wlan${i}${target_suffix} type ${target_mode} 2>&1)"
|
|
|
+ if [ -z "${IW_ERROR}" ]; then
|
|
|
+ if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
+ for j in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
+ if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${j}/type)" = "${target_type}" ]; then
|
|
|
+ #here is where we catch udev renaming our interface
|
|
|
+ k=${j#wlan}
|
|
|
+ i=${k%mon}
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ else
|
|
|
+ printf "Unable to create wlan${i}${target_suffix} and no error received.\n"
|
|
|
+ return 1
|
|
|
+ fi
|
|
|
+ printf "\n\t\t(mac80211 ${target_mode} mode vif enabled on [${PHYDEV}]wlan${i}${target_suffix}\n"
|
|
|
+ unset IW_ERROR
|
|
|
+ break
|
|
|
+ else
|
|
|
+ printf "\n\n ERROR adding ${target_mode} mode interface: ${IW_ERROR}\n"
|
|
|
+ break
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "\nCandidate wlan${i} does not exist, but wlan${i}mon does, skipping...\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "\nCandidate wlan${i} is in use already.\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ done
|
|
|
+}
|
|
|
+
|
|
|
+rfkill_check() {
|
|
|
+ #take phy and check blocks
|
|
|
+ if [ "${RFKILL}" = 0 ]; then
|
|
|
+ #immediately return if rfkill isn't supported
|
|
|
+ return 0
|
|
|
+ fi
|
|
|
+ if [ -z "${1}" ]; then
|
|
|
+ printf "Fatal, rfkill_check requires a phy to be passed in\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ #first we have to find the rfkill index
|
|
|
+ #this is available as /sys/class/net/wlan0/phy80211/rfkill## but that's a bit difficult to parse
|
|
|
+ index="$(rfkill list | grep "${1}:" | awk -F: '{print $1}')"
|
|
|
+ if [ -z "$index" ]; then
|
|
|
+ return 187
|
|
|
+ fi
|
|
|
+ rfkill_status="$(rfkill list ${index} 2>&1)"
|
|
|
+ if [ $? != 0 ]; then
|
|
|
+ printf "rfkill error: ${rfkill_status}\n"
|
|
|
+ return 187
|
|
|
+ elif [ -z "${rfkill_status}" ]; then
|
|
|
+ printf "rfkill had no output, something went wrong.\n"
|
|
|
+ exit 1
|
|
|
+ else
|
|
|
+ soft=$(printf "${rfkill_status}" | grep -i soft | awk '{print $3}')
|
|
|
+ hard=$(printf "${rfkill_status}" | grep -i hard | awk '{print $3}')
|
|
|
+ if [ "${soft}" = "yes" ] && [ "${hard}" = "no" ]; then
|
|
|
+ return 1
|
|
|
+ elif [ "${soft}" = "no" ] && [ "${hard}" = "yes" ]; then
|
|
|
+ return 2
|
|
|
+ elif [ "${soft}" = "yes" ] && [ "${hard}" = "yes" ]; then
|
|
|
+ return 3
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ return 0
|
|
|
+}
|
|
|
+
|
|
|
+rfkill_unblock() {
|
|
|
+ #attempt unblock and CHECK SUCCESS
|
|
|
+ if [ "${RFKILL}" = 0 ]; then
|
|
|
+ #immediately return if rfkill isn't supported
|
|
|
+ return 0
|
|
|
+ fi
|
|
|
+ rfkill_status="$(rfkill unblock ${1#phy} 2>&1)"
|
|
|
+ if [ $? != 0 ]; then
|
|
|
+ rfkill_status="$(rfkill unblock $index 2>&1)"
|
|
|
+ if [ $? != 0 ]; then
|
|
|
+ if [ `echo "$blah" | grep "Usage" | wc -l` -eq 1 ]; then
|
|
|
+ printf "Missing parameters in rfkill! Report this"
|
|
|
+ else
|
|
|
+ printf "rfkill error: ${rfkill_status}\n"
|
|
|
+ fi
|
|
|
+ printf "Unable to unblock.\n"
|
|
|
+ return 1
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ sleep 1
|
|
|
+ return 0
|
|
|
+}
|
|
|
+
|
|
|
+setLink() {
|
|
|
+ if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
+ ip link set dev ${1} ${2} > /dev/null 2>&1 || printf "\nFailed to set ${1} ${2} using ip\n"
|
|
|
+ elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
+ ifconfig ${1} ${2} > /dev/null 2>&1 || printf "\nFailed to set ${1} ${2} using ifconfig\n"
|
|
|
+ fi
|
|
|
+ return
|
|
|
+}
|
|
|
+
|
|
|
+ifaceIsUp() {
|
|
|
+ if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
+ ifaceIsUpCmd="ip link show dev"
|
|
|
+ elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
+ ifaceIsUpCmd="ifconfig"
|
|
|
+ fi
|
|
|
+ if ${ifaceIsUpCmd} ${1} 2>&1 | grep -q UP
|
|
|
+ then
|
|
|
+ return
|
|
|
+ else
|
|
|
+ return 1
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+#listIfaceUnspec() {
|
|
|
+# if [ -x "$(command -v ip 2>&1)" ]; then
|
|
|
+# ip link 2>/dev/null | awk -F"[: ]+" '/UNSPEC/ {print $2}'
|
|
|
+# elif [ -x "$(command -v ifconfig 2>&1)" ]; then
|
|
|
+# ifconfig -a 2>/dev/null | awk -F"[: ]+" '/UNSPEC/ {print $1}'
|
|
|
+# fi
|
|
|
+#}
|
|
|
+
|
|
|
+startDeprecatedIface() {
|
|
|
+ iwconfig ${1} mode monitor > /dev/null 2>&1
|
|
|
+ if [ -n "${2}" ]; then
|
|
|
+ if [ ${2} -lt 1000 ]; then
|
|
|
+ iwconfig ${1} channel ${2} > /dev/null 2>&1
|
|
|
+ else
|
|
|
+ iwconfig ${1} freq ${2}000000 > /dev/null 2>&1
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ iwconfig ${1} channel ${CH} > /dev/null 2>&1
|
|
|
+ fi
|
|
|
+ iwconfig ${1} key off > /dev/null 2>&1
|
|
|
+ setLink ${1} up
|
|
|
+ printf " (monitor mode enabled)"
|
|
|
+}
|
|
|
+
|
|
|
+yesorno() {
|
|
|
+ read input
|
|
|
+ case $input in
|
|
|
+ y) return 0 ;;
|
|
|
+ yes) return 0 ;;
|
|
|
+ n) return 1 ;;
|
|
|
+ no) return 1 ;;
|
|
|
+ *) printf "\nInvalid input. Yes, or no? [y/n] "
|
|
|
+ yesorno;;
|
|
|
+ esac
|
|
|
+}
|
|
|
+
|
|
|
+startMac80211Iface() {
|
|
|
+ #check if rfkill is set and cry if it is
|
|
|
+ rfkill_check ${PHYDEV}
|
|
|
+ rfkill_retcode="$?"
|
|
|
+ case ${rfkill_retcode} in
|
|
|
+ 1) printf "\t${1} is soft blocked, please run \"rfkill unblock ${index}\" to use this interface.\n" ;;
|
|
|
+ 2) printf "\t${1} is hard blocked, please flip the hardware wifi switch (or in BIOS) to on.\n"
|
|
|
+ printf "\tIt may also be possible to unblock with \"rfkill unblock ${index}\"\n"
|
|
|
+ if [ "${checkvm_status}" != "run" ]; then
|
|
|
+ checkvm
|
|
|
+ fi
|
|
|
+ if [ -n "${vm}" ]; then
|
|
|
+ printf "Detected VM using ${vm_from}\n"
|
|
|
+ printf "This appears to be a ${vm} Virtual Machine\n"
|
|
|
+ printf "Some distributions have bugs causing rfkill hard block to be forced on in a VM.\n"
|
|
|
+ printf "If toggling the rfkill hardware switch and \"rfkill unblock ${index}\" both fail\n"
|
|
|
+ printf "to fix this, please try not running in a VM.\n"
|
|
|
+ fi
|
|
|
+ ;;
|
|
|
+ 3) printf "\t${1} is hard and soft blocked, please flip the hardware wifi switch to on.\n"
|
|
|
+ printf "\tIt may also be needed to unblock with \"rfkill unblock ${index}\"\n" ;;
|
|
|
+ esac
|
|
|
+ if [ "${rfkill_retcode}" != 0 ]; then
|
|
|
+ printf "rfkill error, unable to start ${1}\n\n"
|
|
|
+ printf "Would you like to try and automatically resolve this? [y/n] "
|
|
|
+ yesorno
|
|
|
+ retcode="$?"
|
|
|
+ if [ "${retcode}" = "1" ]; then
|
|
|
+ return 1
|
|
|
+ elif [ "${retcode}" = "0" ]; then
|
|
|
+ rfkill_unblock ${PHYDEV}
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ #check if $1 already has a mon interface on the same phy and bail if it does
|
|
|
+ if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
+ for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
+ if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "803" ]; then
|
|
|
+ setChannelMac80211 ${i}
|
|
|
+ printf "\n\t\t(mac80211 monitor mode already enabled for [${PHYDEV}]${1} on [${PHYDEV}]${i})\n"
|
|
|
+ exit
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ fi
|
|
|
+ #we didn't bail means we need a monitor interface
|
|
|
+ if [ ${#1} -gt 12 ]; then
|
|
|
+ printf "Interface ${1}mon is too long for linux so it will be renamed to the old style (wlan#) name.\n"
|
|
|
+ findFreeInterface monitor
|
|
|
+ else
|
|
|
+ if [ -e /sys/class/net/${1}mon ]; then
|
|
|
+ printf "\nYou already have a ${1}mon device but it is NOT in monitor mode."
|
|
|
+ printf "\nWhatever you did, don't do it again."
|
|
|
+ printf "\nPlease run \"iw ${1}mon del\" before attempting to continue\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ #we didn't bail means our target interface is available
|
|
|
+ setLink ${1} down
|
|
|
+ if [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ] || [ "${DRIVER}" = "88XXau" ]; then
|
|
|
+ #grumble grumble, seriously crap vendor driver
|
|
|
+ startDeprecatedIface ${1}
|
|
|
+ setChannelMac80211 ${1}
|
|
|
+ return
|
|
|
+ fi
|
|
|
+ IW_ERROR="$(iw phy ${PHYDEV} interface add ${1}mon type monitor 2>&1)"
|
|
|
+ if [ -z "${IW_ERROR}" ]; then
|
|
|
+ sleep 1
|
|
|
+ if [ -r "/sys/class/ieee80211/${PHYDEV}/device/net/${1}mon/type" ] && [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${1}mon/type)" = "803" ]; then
|
|
|
+ setChannelMac80211 ${1}mon
|
|
|
+ else
|
|
|
+ printf "\nNewly created monitor mode interface ${1}mon is *NOT* in monitor mode.\n"
|
|
|
+ printf "Removing non-monitor ${1}mon interface...\n"
|
|
|
+ stopMac80211Iface ${1}mon abort
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ printf "\n\t\t(mac80211 monitor mode vif enabled for [${PHYDEV}]${1} on [${PHYDEV}]${1}mon)\n"
|
|
|
+ else
|
|
|
+ printf "\n\nERROR adding monitor mode interface: ${IW_ERROR}\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ "${ELITE}" = "1" ]; then
|
|
|
+ #check if $1 is still down, warn if not
|
|
|
+ if ifaceIsUp ${1}
|
|
|
+ then
|
|
|
+ printf "\nInterface ${1} is up, but it should be down. Something is interfering."
|
|
|
+ printf "\nPlease run \"airmon-ng check kill\" and/or kill your network manager."
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ isRPiWireless && iw ${1} del
|
|
|
+ printf "\t\t(mac80211 station mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+isRPiWireless() {
|
|
|
+ local HW_REV=$(grep Revision /proc/cpuinfo | awk '{print $3}')
|
|
|
+ [ -z "${HW_REV}" ] && return 0
|
|
|
+ # http://www.raspberrypi-spy.co.uk/2012/09/checking-your-raspberry-pi-board-version/
|
|
|
+ # https://www.raspberrypi.org/documentation/hardware/raspberrypi/revision-codes/README.md
|
|
|
+ [ "${HW_REV}" = 'a22082' ] && return 1
|
|
|
+ [ "${HW_REV}" = 'a32082' ] && return 1
|
|
|
+ [ "${HW_REV}" = 'a52082' ] && return 1
|
|
|
+ [ "${HW_REV}" = 'a02082' ] && return 1
|
|
|
+ [ "${HW_REV}" = '9000c1' ] && return 1
|
|
|
+ [ "${HW_REV}" = 'a020d3' ] && return 1
|
|
|
+ [ "${HW_REV}" = '9020e0' ] && return 1
|
|
|
+ return 0
|
|
|
+}
|
|
|
+
|
|
|
+startwlIface() {
|
|
|
+ if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
+ if [ -r "/proc/brcm_monitor0" ]; then
|
|
|
+ local brcm_monitor="$(cat /proc/brcm_monitor0)"
|
|
|
+ if [ "$brcm_monitor" = "1" ]; then
|
|
|
+ printf "\n\t\t(experimental wl monitor mode vif already enabled for [${PHYDEV}]${1} on [${PHYDEV}]prism0)\n"
|
|
|
+ return 0
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ -w "/proc/brcm_monitor0" ]; then
|
|
|
+ printf "1" > /proc/brcm_monitor0
|
|
|
+ if [ "$?" = "0" ]; then
|
|
|
+ printf "\n\t\t(experimental wl monitor mode vif enabled for [${PHYDEV}]${1} on [${PHYDEV}]prism0)\n"
|
|
|
+ else
|
|
|
+ printf "\n\t\t(failed to enable experimental wl monitor mode for [${PHYDEV}${1})\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "\n\tUnable to write to /proc/brcm_monitor0, cannot enable monitor mode.\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "\n\tThis version of wl does not appear to support monitor mode.\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+#startDarwinIface() {
|
|
|
+# if [ -x /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport ]; then
|
|
|
+# if [ -n "${CH}" ] && [ ${CH} -lt 220 ]; then
|
|
|
+# /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resources/airport $1 sniff ${CH}
|
|
|
+# else
|
|
|
+# printf "Channel is set to none channel value of ${CH}
|
|
|
+# fi
|
|
|
+# fi
|
|
|
+#}
|
|
|
+
|
|
|
+setChannelMac80211() {
|
|
|
+ setLink ${1} up
|
|
|
+ if [ -n "${CH}" ]; then
|
|
|
+ if [ ${CH} -lt 1000 ]; then
|
|
|
+ if [ -r "/sys/class/net/$1/phy80211/name" ]; then
|
|
|
+ channel_list="$(iw phy $(cat /sys/class/net/$1/phy80211/name) info 2>&1 | awk -F'[][]' '$2{print $2}')"
|
|
|
+ local hardware_valid_channel=1
|
|
|
+ for i in $channel_list; do
|
|
|
+ if [ "${CH}" = "${i}" ]; then
|
|
|
+ hardware_valid_channel=0
|
|
|
+ break
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ if [ "${hardware_valid_channel}" = "1" ]; then
|
|
|
+ printf "Channel ${CH} does not appear to be supported by ${1} hardware, defaulting to channel 3.\n\n"
|
|
|
+ CH=3
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ IW_ERROR="$(iw dev ${1} set channel ${CH} 2>&1)"
|
|
|
+ else
|
|
|
+ if [ -r "/sys/class/net/$1/phy80211/name" ]; then
|
|
|
+ frequency_list="$(iw phy $(cat /sys/class/net/$1/phy80211/name) info 2>&1 | sed -nr 's/.*( |^)([0-9]+) MHz .*/\2/p')"
|
|
|
+ local hardware_valid_freq=1
|
|
|
+ for i in $frequency_list; do
|
|
|
+ if [ "${CH}" = "${i}" ]; then
|
|
|
+ hardware_valid_freq=0
|
|
|
+ break
|
|
|
+ fi
|
|
|
+ print
|
|
|
+ done
|
|
|
+ if [ "${hardware_valid_freq}" = "1" ]; then
|
|
|
+ printf "Frequency ${CH} does not appear to be supported by ${1} hardware, defaulting to 2422 Mhz.\n\n"
|
|
|
+ CH="2422"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ IW_ERROR="$(iw dev ${1} set freq "${CH}" 2>&1)"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "CH is unset, this should not be possible.\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ if [ -n "${IW_ERROR}" ]; then
|
|
|
+ printf "\nError setting channel: ${IW_ERROR}\n"
|
|
|
+ if printf "${IW_ERROR}" | grep -q "(-16)"; then
|
|
|
+ printf "Error -16 likely means your card was set back to station mode by something.\n"
|
|
|
+ printf "Removing non-monitor ${1} interface...\n"
|
|
|
+ stopMac80211Iface "${1}" abort
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ if printf "${IW_ERROR}" | grep -q "(-22)"; then
|
|
|
+ printf "Unable to set channel/frequency ${CH}, most likely it is outside of regulatory domain\n\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+stopDeprecatedIface() {
|
|
|
+ setLink $1 down
|
|
|
+ iwconfig $1 mode Managed > /dev/null 2>&1
|
|
|
+ setLink $1 up
|
|
|
+ printf " (monitor mode disabled)"
|
|
|
+}
|
|
|
+
|
|
|
+stopMac80211Iface() {
|
|
|
+ if [ -f /sys/class/net/${1}/type ]; then
|
|
|
+ if [ "${2}" != "abort" ] && [ "$(cat /sys/class/net/${1}/type)" != "803" ]; then
|
|
|
+ printf "\n\nYou are trying to stop a device that isn't in monitor mode.\n"
|
|
|
+ printf "Doing so is a terrible idea, if you really want to do it then you\n"
|
|
|
+ printf "need to type 'iw ${1} del' yourself since it is a terrible idea.\n"
|
|
|
+ printf "Most likely you want to remove an interface called wlan[0-9]mon\n"
|
|
|
+ printf "If you feel you have reached this warning in error,\n"
|
|
|
+ printf "please report it.\n"
|
|
|
+ exit 1
|
|
|
+ else
|
|
|
+ if [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ] || [ "${DRIVER}" = "88XXau" ]; then
|
|
|
+ #grumble grumble, seriously crap vendor driver
|
|
|
+ stopDeprecatedIface ${1}
|
|
|
+ return
|
|
|
+ fi
|
|
|
+ if [ "${ELITE}" = "0" ]; then
|
|
|
+ local need_sta=1
|
|
|
+ if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
+ for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
+ if [ -r /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type ] && [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "1" ]; then
|
|
|
+ [ "${2}" != "abort" ] && printf "\n\t\t(mac80211 station mode vif already available for [${PHYDEV}]${1} on [${PHYDEV}]${i})\n"
|
|
|
+ need_sta=0
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ fi
|
|
|
+ if [ "${need_sta}" = "1" ] && [ -e /sys/class/net/${1%mon}/phy80211/name ]; then
|
|
|
+ if [ "$(cat /sys/class/net/${1%mon}/phy80211/name)" = "${PHYDEV}" ]; then
|
|
|
+ printf "\nYou already have a ${1%mon} device but it is NOT in station mode."
|
|
|
+ printf "\nWhatever you did, don't do it again."
|
|
|
+ printf "\nPlease run \"iw ${1%mon} del\" before attempting to continue\n"
|
|
|
+ exit 1
|
|
|
+ else
|
|
|
+ printf "\nYou already have a ${1%mon} device, but it is not on the same phy as ${1}.\n"
|
|
|
+ printf "\nAttemping to pick a new name...\n"
|
|
|
+ findFreeInterface station
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ "${need_sta}" = "1" ]; then
|
|
|
+ IW_ERROR="$(iw phy ${PHYDEV} interface add ${1%mon} type station 2>&1)"
|
|
|
+ if [ -z "${IW_ERROR}" ]; then
|
|
|
+ interface="${1%mon}"
|
|
|
+ if [ -d /sys/class/ieee80211/${PHYDEV}/device/net ]; then
|
|
|
+ for i in $(ls /sys/class/ieee80211/${PHYDEV}/device/net/); do
|
|
|
+ if [ "$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${i}/type)" = "1" ]; then
|
|
|
+ #here is where we catch udev renaming our interface
|
|
|
+ interface="${i}"
|
|
|
+ fi
|
|
|
+ done
|
|
|
+ fi
|
|
|
+ printf "\n\t\t(mac80211 station mode vif enabled on [${PHYDEV}]${interface})\n"
|
|
|
+ else
|
|
|
+ printf "\n\n ERROR adding station mode interface: ${IW_ERROR}\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ setLink ${1} down
|
|
|
+ IW_ERROR="$(iw dev "${1}" del 2>&1 | grep "nl80211 not found")"
|
|
|
+ if [ -z "$IW_ERROR" ]; then
|
|
|
+ if [ "${2}" != "abort" ]; then
|
|
|
+ printf "\n\t\t(mac80211 monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
+ elif [ "${2}" = "abort" ]; then
|
|
|
+ printf "\nWARNING: unable to start monitor mode, please run \"airmon-ng check kill\"\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ if [ -f /sys/class/ieee80211/${PHYDEV}/remove_iface ]; then
|
|
|
+ printf "${1}" > /sys/class/ieee80211/${PHYDEV}/remove_iface
|
|
|
+ printf "\n\t\t(mac80211 monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
+ else
|
|
|
+ printf "\n\nERROR: Neither the sysfs interface links nor the iw command is available.\nPlease download and install iw from\n$IW_SOURCE\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+stopwlIface() {
|
|
|
+ if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
+ if [ -r "/proc/brcm_monitor0" ]; then
|
|
|
+ local brcm_monitor="$(cat /proc/brcm_monitor0)"
|
|
|
+ if [ "$brcm_monitor" = "0" ]; then
|
|
|
+ printf "\n\t\t(experimental wl monitor mode vif already disabled for [${PHYDEV}]${1})\n"
|
|
|
+ return 0
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ -w "/proc/brcm_monitor0" ]; then
|
|
|
+ printf "0" > /proc/brcm_monitor0
|
|
|
+ if [ "$?" = "0" ]; then
|
|
|
+ printf "\n\t\t(experimental wl monitor mode vif disabled for [${PHYDEV}]${1})\n"
|
|
|
+ else
|
|
|
+ printf "\n\t\t(failed to disable experimental wl monitor mode for [${PHYDEV}${1})\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "\n\tUnable to write to /proc/brcm_monitor0, cannot disable monitor mode.\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "\n\tThis version of wl does not appear to support monitor mode.\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getDriver() {
|
|
|
+ unset DRIVER
|
|
|
+ #standard detection path, this is all that is needed for proper drivers
|
|
|
+ #DRIVER=$(printf "$ethtool_output" | awk '/driver/ {print $2}')
|
|
|
+
|
|
|
+ #if $(modinfo -F filename ${DRIVER} > /dev/null 2>&1)
|
|
|
+ #then
|
|
|
+ # true
|
|
|
+ #else
|
|
|
+ # unset DRIVER
|
|
|
+ #fi
|
|
|
+
|
|
|
+ #if [ "$DRIVER" = "" ]
|
|
|
+ #then
|
|
|
+ if [ -f /sys/class/net/$1/device/uevent ]; then
|
|
|
+ DRIVER="$(awk -F'=' '$1 == "DRIVER" {print $2}' /sys/class/net/$1/device/uevent)"
|
|
|
+ fi
|
|
|
+ #fi
|
|
|
+
|
|
|
+ #here we test for driver usb, ath9k_htc,rt2870, possibly others show this
|
|
|
+ if [ "$DRIVER" = "usb" ]; then
|
|
|
+ printf "Warn ON: USB\n"
|
|
|
+ BUSADDR="$(printf "$ethtool_output" | awk '/bus-info/ {print $2}'):1.0"
|
|
|
+
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "${BUSADDR}\n"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -n "$BUSADDR" ]; then
|
|
|
+ if [ -f /sys/class/net/$1/device/"$BUSADDR"/uevent ]; then
|
|
|
+ DRIVER="$(awk -F'=' '$1 == "DRIVER" {print $2}' /sys/class/net/$1/device/$BUSADDR/uevent)"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ #here we can normalize driver names we don't like
|
|
|
+ if [ "$DRIVER" = "rt2870" ]; then
|
|
|
+ DRIVER="rt2870sta"
|
|
|
+ fi
|
|
|
+ if [ -f /sys/class/net/$1/device/idProduct ]; then
|
|
|
+ if [ "$(cat /sys/class/net/$1/device/idProduct)" = "3070" ]; then
|
|
|
+ DRIVER="rt3070sta"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "rtl8187L" ]; then
|
|
|
+ DRIVER="r8187l"
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "rtl8187" ] && [ "$STACK" = "ieee80211" ]; then
|
|
|
+ DRIVER="r8187"
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "rtl88xxau" ]; then
|
|
|
+ DRIVER="88XXau"
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "rtl8812au" ]; then
|
|
|
+ DRIVER="8812au"
|
|
|
+ fi
|
|
|
+
|
|
|
+ #Here we will catch the broken lying drivers not caught above
|
|
|
+ #currently this only functions for pci devices and not usb since lsusb has no -k option
|
|
|
+ if [ "${MODINFO}" = "1" ]; then
|
|
|
+ if $(modinfo -F filename $DRIVER > /dev/null 2>&1)
|
|
|
+ then
|
|
|
+ true
|
|
|
+ else
|
|
|
+ save="$DRIVER"
|
|
|
+
|
|
|
+ if [ -n "${DEVICEID}" ] && [ "$BUS" = "pci" ]; then
|
|
|
+ DRIVER="$(lspci -d $DEVICEID -k | awk '/modules/ {print $3}')"
|
|
|
+ fi
|
|
|
+ if [ -z "${BUS}" ] || [ "${BUS}" != 'sdio' ]; then
|
|
|
+ unset DRIVER
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -n "$save" ] && [ -z "$DRIVER" ] ; then
|
|
|
+ DRIVER="$save"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ -z "$DRIVER" ] ; then
|
|
|
+ DRIVER="??????"
|
|
|
+ fi
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getdriver() $DRIVER\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getFrom() {
|
|
|
+ #from detection
|
|
|
+ FROM="K"
|
|
|
+ if [ "${MODINFO}" = "1" ] && [ -f /proc/modules ]; then
|
|
|
+ if modinfo -F filename $DRIVER 2>&1 | grep -q 'kernel/drivers'
|
|
|
+ then
|
|
|
+ FROM="K"
|
|
|
+ #we add special handling here because we hate the vendor drivers AND they install in the wrong place
|
|
|
+ if [ "$DRIVER" = "r8187" ]; then
|
|
|
+ FROM="V"
|
|
|
+ elif [ "$DRIVER" = "r8187l" ]; then
|
|
|
+ FROM="V"
|
|
|
+ elif [ "$DRIVER" = "rt5390sta" ]; then
|
|
|
+ FROM="V"
|
|
|
+ elif [ "${DRIVER}" = "8812au" ] || [ "${DRIVER}" = "8814au" ]; then
|
|
|
+ FROM="V"
|
|
|
+ fi
|
|
|
+ elif modinfo -F filename $DRIVER 2>&1 | grep -q 'updates/drivers'
|
|
|
+ then
|
|
|
+ FROM="C"
|
|
|
+ elif modinfo -F filename $DRIVER 2>&1 | grep -q misc
|
|
|
+ then
|
|
|
+ FROM="V"
|
|
|
+ elif modinfo -F filename $DRIVER 2>&1 | grep -q staging
|
|
|
+ then
|
|
|
+ FROM="S"
|
|
|
+ else
|
|
|
+ FROM="?"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ FROM="K"
|
|
|
+ fi
|
|
|
+ #maybe add an 'intree' check?
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getFrom() $FROM\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getFirmware() {
|
|
|
+ FIRMWARE="$(printf "$ethtool_output" | awk '/firmware-version/ {print $2}')"
|
|
|
+ #ath9k_htc firmware is a shorter version number than most so trap and make it pretty
|
|
|
+ if [ "$DRIVER" = "ath9k_htc" ]; then
|
|
|
+ FIRMWARE="$FIRMWARE\t"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$FIRMWARE" = "N/A" ]; then
|
|
|
+ FIRMWARE="$FIRMWARE\t"
|
|
|
+ elif [ -z "$FIRMWARE" ]; then
|
|
|
+ FIRMWARE="unavailable"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getFirmware $FIRMWARE\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getChipset() {
|
|
|
+ #this needs cleanup, we shouldn't have multiple lines assigning chipset per bus
|
|
|
+ #fix this to be one line per bus
|
|
|
+ if [ -f /sys/class/net/$1/device/modalias ]; then
|
|
|
+ if [ "$BUS" = "usb" ]; then
|
|
|
+ if [ "${LSUSB}" = "1" ]; then
|
|
|
+ BUSINFO="$(cut -d ":" -f 2 /sys/class/net/$1/device/modalias | cut -b 1-10 | sed 's/^.//;s/p/:/')"
|
|
|
+ CHIPSET="$(lsusb -d "$BUSINFO" | head -n1 - | cut -f3- -d ":" | sed 's/^....//;s/ Network Connection//g;s/ Wireless Adapter//g;s/^ //')"
|
|
|
+ elif [ "${LSUSB}" = "0" ]; then
|
|
|
+ printf "Your system doesn't seem to support usb but we found usb hardware, please report this.\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+ #yes the below line looks insane, but broadcom appears to define all the internal buses so we have to detect them here
|
|
|
+ elif [ "${BUS}" = "pci" -o "${BUS}" = "pcmcia" ] && [ "${LSPCI}" = "1" ]; then
|
|
|
+ if [ -f /sys/class/net/$1/device/vendor ] && [ -f /sys/class/net/$1/device/device ]; then
|
|
|
+ DEVICEID="$(cat /sys/class/net/$1/device/vendor):$(cat /sys/class/net/$1/device/device)"
|
|
|
+ CHIPSET="$(lspci -d $DEVICEID | cut -f3- -d ":" | sed 's/Wireless LAN Controller //g;s/ Network Connection//g;s/ Wireless Adapter//;s/^ //')"
|
|
|
+ else
|
|
|
+ BUSINFO="$(printf "$ethtool_output" | grep bus-info | cut -d ":" -f "3-" | sed 's/^ //')"
|
|
|
+ CHIPSET="$(lspci | grep "$BUSINFO" | head -n1 - | cut -f3- -d ":" | sed 's/Wireless LAN Controller //g;s/ Network Connection//g;s/ Wireless Adapter//;s/^ //')"
|
|
|
+ DEVICEID="$(lspci -nn | grep "$BUSINFO" | grep '[[0-9][0-9][0-9][0-9]:[0-9][0-9][0-9][0-9]' -o)"
|
|
|
+ fi
|
|
|
+ elif [ "${BUS}" = "sdio" ]; then
|
|
|
+ if [ -f /sys/class/net/$1/device/vendor ] && [ -f /sys/class/net/$1/device/device ]; then
|
|
|
+ DEVICEID="$(cat /sys/class/net/$1/device/vendor):$(cat /sys/class/net/$1/device/device)"
|
|
|
+ fi
|
|
|
+ if [ "${DEVICEID}" = '0x02d0:0x4330' ]; then
|
|
|
+ CHIPSET='Broadcom 4330'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4329' ]; then
|
|
|
+ CHIPSET='Broadcom 4329'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4334' ]; then
|
|
|
+ CHIPSET='Broadcom 4334'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0xa94c' ]; then
|
|
|
+ CHIPSET='Broadcom 43340'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0xa94d' ]; then
|
|
|
+ CHIPSET='Broadcom 43341'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4324' ]; then
|
|
|
+ CHIPSET='Broadcom 43241'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4335' ]; then
|
|
|
+ CHIPSET='Broadcom 4335/4339'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0xa962' ]; then
|
|
|
+ CHIPSET='Broadcom 43362'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0xa9a6' ]; then
|
|
|
+ CHIPSET='Broadcom 43430'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4345' ]; then
|
|
|
+ CHIPSET='Broadcom 43455'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0x4354' ]; then
|
|
|
+ CHIPSET='Broadcom 4354'
|
|
|
+ elif [ "${DEVICEID}" = '0x02d0:0xa887' ]; then
|
|
|
+ CHIPSET='Broadcom 43143'
|
|
|
+ else
|
|
|
+ CHIPSET="unable to detect for sdio $DEVICEID"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ CHIPSET="Not pci, usb, or sdio"
|
|
|
+ fi
|
|
|
+ #we don't do a check for usb here but it is obviously only going to work for usb
|
|
|
+ elif [ -f /sys/class/net/$1/device/idVendor ] && [ -f /sys/class/net/$1/device/idProduct ]; then
|
|
|
+ DEVICEID="$(cat /sys/class/net/$1/device/idVendor):$(cat /sys/class/net/$1/device/idProduct)"
|
|
|
+ if [ "${LSUSB}" = "1" ]; then
|
|
|
+ CHIPSET="$(lsusb | grep -i "$DEVICEID" | head -n1 - | cut -f3- -d ":" | sed 's/^....//;s/ Network Connection//g;s/ Wireless Adapter//g;s/^ //')"
|
|
|
+ elif [ "${LSUSB}" = "0" ]; then
|
|
|
+ CHIPSET="idVendor and idProduct found on non-usb device, please report this."
|
|
|
+ fi
|
|
|
+ elif [ "${DRIVER}" = "mac80211_hwsim" ]; then
|
|
|
+ CHIPSET="Software simulator of 802.11 radio(s) for mac80211"
|
|
|
+ elif $(printf "$ethtool_output" | awk '/bus-info/ {print $2}' | grep -q bcma)
|
|
|
+ then
|
|
|
+ BUS="bcma"
|
|
|
+
|
|
|
+ if [ "${DRIVER}" = "brcmsmac" ] || [ "${DRIVER}" = "brcmfmac" ] || [ "${DRIVER}" = "b43" ]; then
|
|
|
+ CHIPSET="Broadcom on bcma bus, information limited"
|
|
|
+ else
|
|
|
+ CHIPSET="Unrecognized driver \"${DRIVER}\" on bcma bus"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ CHIPSET="non-mac80211 device? (report this!)"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getchipset() $CHIPSET\n"
|
|
|
+ printf "BUS = $BUS\n"
|
|
|
+ printf "BUSINFO = $BUSINFO\n"
|
|
|
+ printf "DEVICEID = $DEVICEID\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getBus() {
|
|
|
+ if [ -f /sys/class/net/$1/device/modalias ]; then
|
|
|
+ BUS="$(cut -d ":" -f 1 /sys/class/net/$1/device/modalias)"
|
|
|
+ fi
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getBus $BUS\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getStack() {
|
|
|
+ if [ -z "$1" ]; then
|
|
|
+ return
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -d /sys/class/net/$1/phy80211/ ]; then
|
|
|
+ MAC80211="1"
|
|
|
+ STACK="mac80211"
|
|
|
+ else
|
|
|
+ MAC80211="0"
|
|
|
+ STACK="ieee80211"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -e /proc/sys/dev/$1/fftxqmin ]; then
|
|
|
+ MAC80211="0"
|
|
|
+ STACK="net80211"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "getStack $STACK\n"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+getExtendedInfo() {
|
|
|
+ #stuff rfkill info into extended if nothing else is there
|
|
|
+ rfkill_check ${PHYDEV}
|
|
|
+ rfkill_retcode="$?"
|
|
|
+ if [ "${rfkill_retcode}" = "1" ]; then
|
|
|
+ EXTENDED="rfkill soft blocked"
|
|
|
+ elif [ "${rfkill_retcode}" = "2" ]; then
|
|
|
+ EXTENDED="rfkill hard blocked"
|
|
|
+ elif [ "${rfkill_redcode}" = "3" ]; then
|
|
|
+ EXTENDED="rfkill hard and soft blocked"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DRIVER" = "??????" ]; then
|
|
|
+ EXTENDED="\t Failure detecting driver properly please report"
|
|
|
+ fi
|
|
|
+
|
|
|
+ #first we set all the real (useful) info we can find
|
|
|
+ if [ -f /sys/class/net/$1/device/product ]; then
|
|
|
+ EXTENDED="\t$(cat /sys/class/net/$1/device/product)"
|
|
|
+ fi
|
|
|
+
|
|
|
+ #then we sweep for known broken drivers with no available better drivers
|
|
|
+ if [ "$DRIVER" = "wl" ]; then
|
|
|
+ if [ -f "/proc/brcm_monitor0" ]; then
|
|
|
+ EXTENDED="Experimental monitor mode support"
|
|
|
+ else
|
|
|
+ EXTENDED="No known monitor support, try a newer version or b43"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "brcmsmac" ]; then
|
|
|
+ EXTENDED="Driver commonly referred to as brcm80211 (no injection yet)"
|
|
|
+ fi
|
|
|
+ if [ "$DRIVER" = "r8712u" ]; then
|
|
|
+ EXTENDED="\t\t\t\tNo monitor or injection support"
|
|
|
+ fi
|
|
|
+
|
|
|
+ #lastly we detect all the broken drivers which have working alternatives
|
|
|
+ KV="$(uname -r | awk -F'-' '{print $1}')"
|
|
|
+ KVMAJOR="$(printf ${KV} | awk -F'.' '{print $1$2}')"
|
|
|
+ KVMINOR="$(printf ${KV} | awk -F'.' '{print $3}')"
|
|
|
+
|
|
|
+ if [ $KVMAJOR -lt 26 ]; then
|
|
|
+ printf "You are running a kernel older than 2.6, I'm surprised it didn't error before now."
|
|
|
+ if [ "$DEBUG" = "1" ]; then
|
|
|
+ printf "${KVMAJOR} ${KVMINOR}\n"
|
|
|
+ fi
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DRIVER" = "rt2870sta" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "35" ]; then
|
|
|
+ EXTENDED="\tBlacklist rt2870sta and use rt2800usb"
|
|
|
+ else
|
|
|
+ EXTENDED="\tUpgrade to kernel 2.6.35 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ #add in a flag for "did you tell use to do X" and emit instructions
|
|
|
+ elif [ "$DRIVER" = "rt3070sta" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "35" ]; then
|
|
|
+ EXTENDED="\tBlacklist rt3070sta and use rt2800usb"
|
|
|
+ else
|
|
|
+ EXTENDED="\tUpgrade to kernel 2.6.35 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ elif [ "$DRIVER" = "rt5390sta" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "39" ]; then
|
|
|
+ EXTENDED="\tBlacklist rt5390sta and use rt2800usb"
|
|
|
+ else
|
|
|
+ EXTENDED="\tUpgrade to kernel 2.6.39 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ elif [ "$DRIVER" = "ar9170usb" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "37" ]; then
|
|
|
+ EXTENDED="\tBlacklist ar9170usb and use carl9170"
|
|
|
+ else
|
|
|
+ EXTENDED="\tUpgrade to kernel 2.6.37 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ elif [ "$DRIVER" = "arusb_lnx" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "37" ]; then
|
|
|
+ EXTENDED="\tBlacklist arusb_lnx and use carl9170"
|
|
|
+ else
|
|
|
+ EXTENDED="\tUpgrade to kernel 2.6.37 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ elif [ "$DRIVER" = "r8187" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "29" ]; then
|
|
|
+ EXTENDED="\t\tBlacklist r8187 and use rtl8187 from the kernel"
|
|
|
+ else
|
|
|
+ EXTENDED="\t\tUpgrade to kernel 2.6.29 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ elif [ "$DRIVER" = "r8187l" ]; then
|
|
|
+ if [ "$KVMAJOR" = "26" ] && [ "$KVMINOR" -ge "29" ]; then
|
|
|
+ EXTENDED="\t\tBlacklist r8187l and use rtl8187 from the kernel"
|
|
|
+ else
|
|
|
+ EXTENDED="\t\tUpgrade to kernel 2.6.29 or install compat-wireless stable"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ #okay, now I take overload to a new level
|
|
|
+ #if there is nothing else here to complain about, show mode
|
|
|
+ if [ -z "${EXTENDED}" ]; then
|
|
|
+ if [ -r "/sys/class/net/${1}/type" ]; then
|
|
|
+ NET_TYPE="$(cat /sys/class/net/${1}/type)"
|
|
|
+ elif [ -r "/sys/class/ieee80211/${PHYDEV}/device/net/${1}/type" ]; then
|
|
|
+ NET_TYPE="$(cat /sys/class/ieee80211/${PHYDEV}/device/net/${1}/type)"
|
|
|
+ fi
|
|
|
+ if [ -n "${NET_TYPE}" ]; then
|
|
|
+ if [ "${NET_TYPE}" = "803" ]; then
|
|
|
+ EXTENDED="mode monitor"
|
|
|
+ elif [ "${NET_TYPE}" = "1" ]; then
|
|
|
+ EXTENDED="mode managed"
|
|
|
+ else
|
|
|
+ EXTENDED="mode ${NET_TYPE} unknown"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+scanProcesses() {
|
|
|
+ #this test means it errored and said it was busybox since busybox doesn't print without error
|
|
|
+ if (ps -A 2>&1 | grep -q BusyBox)
|
|
|
+ then
|
|
|
+ #busybox in openwrt cannot handle -A but its output by default is -A
|
|
|
+ psopts=""
|
|
|
+ else
|
|
|
+ psopts="-A"
|
|
|
+ fi
|
|
|
+ if ( ps -o comm= 2>&1 | grep -q BusyBox )
|
|
|
+ then
|
|
|
+ #busybox in openwrt cannot handle -o
|
|
|
+ pso="0"
|
|
|
+ else
|
|
|
+ pso="1"
|
|
|
+ fi
|
|
|
+
|
|
|
+ PROCESSES="wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\|ifplugd\|dhcdbd\|dhcpcd\|udhcpc\|NetworkManager\|knetworkmanager\|avahi-autoipd\|avahi-daemon\|wlassistant\|wifibox"
|
|
|
+ #PS_ERROR="invalid\|illegal"
|
|
|
+
|
|
|
+ if [ -x "$(command -v service 2>&1)" ] && [ "$1" = "kill" ]; then
|
|
|
+ service network-manager stop 2> /dev/null > /dev/null
|
|
|
+ service NetworkManager stop 2> /dev/null > /dev/null
|
|
|
+ service avahi-daemon stop 2> /dev/null > /dev/null
|
|
|
+ fi
|
|
|
+
|
|
|
+ unset match
|
|
|
+ if [ "${pso}" = 1 ]; then
|
|
|
+ match="$(ps ${psopts} -o comm= | grep ${PROCESSES} | grep -v grep | wc -l)"
|
|
|
+ elif [ "${pso}" = 0 ]; then
|
|
|
+ #openwrt busybox grep hits on itself so we -v it out
|
|
|
+ match="$(ps ${psopts} | grep ${PROCESSES} | grep -v grep | wc -l)"
|
|
|
+ fi
|
|
|
+ if [ ${match} -gt 0 ] && [ "${1}" != "kill" ]; then
|
|
|
+ printf "Found $match processes that could cause trouble.\n"
|
|
|
+ printf "Kill them using 'airmon-ng check kill' before putting\n"
|
|
|
+ printf "the card in monitor mode, they will interfere by changing channels\n"
|
|
|
+ printf "and sometimes putting the interface back in managed mode\n\n"
|
|
|
+ else
|
|
|
+ if [ "${1}" != "kill" ] && [ -n "${1}" ]; then
|
|
|
+ printf "No interfering processes found\n"
|
|
|
+ return
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ ${match} -gt 0 ]; then
|
|
|
+ if [ "${1}" = "kill" ]; then
|
|
|
+ printf "Killing these processes:\n\n"
|
|
|
+ fi
|
|
|
+ if [ "${pso}" = "1" ]; then
|
|
|
+ ps ${psopts} -o pid=PID -o comm=Name | grep "${PROCESSES}\|PID"
|
|
|
+ else
|
|
|
+ #openwrt busybox grep hits on itself so we -v it out
|
|
|
+ ps ${psopts} | grep "${PROCESSES}\|PID | grep -v grep"
|
|
|
+ fi
|
|
|
+ if [ "${1}" = "kill" ]; then
|
|
|
+ #we have to use signal 9 because things like nm actually respawn wpa_supplicant too quickly
|
|
|
+ if [ "${pso}" = "1" ]; then
|
|
|
+ for pid in $(ps ${psopts} -o pid= -o comm= | grep ${PROCESSES} | awk '{print $1}'); do
|
|
|
+ kill -9 ${pid}
|
|
|
+ done
|
|
|
+ else
|
|
|
+ #openwrt busybox grep hits on itself so we -v it out
|
|
|
+ for pid in $(ps ${psopts} | grep ${PROCESSES} | grep -v grep | awk '{print $1}'); do
|
|
|
+ kill -9 ${pid}
|
|
|
+ done
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ #i=1
|
|
|
+ #while [ $i -le $match ]
|
|
|
+ #do
|
|
|
+ # pid=$(ps ${psopts} -o pid= -o comm= | grep $PROCESSES | head -n $i | tail -n 1 | awk '{print $1}')
|
|
|
+ # pname=$(ps ${psopts} -o pid= -o comm= | grep $PROCESSES | head -n $i | tail -n 1 | awk '{print $2}')
|
|
|
+ # if [ x"$1" != "xkill" ]
|
|
|
+ # then
|
|
|
+ # printf "${pid}\t${pname}\n"
|
|
|
+ # else
|
|
|
+ # kill ${pid}
|
|
|
+ # fi
|
|
|
+ # i=$(($i+1))
|
|
|
+ #done
|
|
|
+
|
|
|
+ printf "\n"
|
|
|
+
|
|
|
+ #this stub is for checking against the interface name, but since it almost never hits why bother?
|
|
|
+ #if [ x"${1}" != "x" -a x"${1}" != "xkill" ]
|
|
|
+ #then
|
|
|
+ # #the next line doesn't work on busybox ps because -p is unimplimented
|
|
|
+ # match2=$(ps -o comm= -p 1 2>&1 | grep $PS_ERROR -c)
|
|
|
+ # if [ ${match2} -gt 0 ]
|
|
|
+ # then
|
|
|
+ # return
|
|
|
+ # fi
|
|
|
+ #
|
|
|
+ # for i in $(ps auxw | grep ${1} | grep -v "grep" | grep -v "airmon-ng" | awk '{print $2}')
|
|
|
+ # do
|
|
|
+ # pname=$(ps -o comm= -p ${i})
|
|
|
+ # printf "Process with PID ${i} ($pname) is running on interface ${1}\n"
|
|
|
+ # done
|
|
|
+ #fi
|
|
|
+}
|
|
|
+
|
|
|
+listInterfaces() {
|
|
|
+ unset iface_list
|
|
|
+ for iface in $(ls -1 /sys/class/net)
|
|
|
+ do
|
|
|
+ if [ -f /sys/class/net/${iface}/uevent ]; then
|
|
|
+ if $(grep -q DEVTYPE=wlan /sys/class/net/${iface}/uevent)
|
|
|
+ then
|
|
|
+ iface_list="${iface_list}\n ${iface}"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ done
|
|
|
+
|
|
|
+ # this block only adds garbage to me
|
|
|
+ #if [ -x "$(command -v iwconfig 2>&1)" ] && [ -x "$(command -v sort 2>&1)" ]; then
|
|
|
+ # for iface in $(iwconfig 2> /dev/null | sed 's/^\([a-zA-Z0-9_.]*\) .*/\1/'); do
|
|
|
+ # iface_list="${iface_list}\n ${iface}"
|
|
|
+ # done
|
|
|
+ # iface_list="$(printf "${iface_list}" | sort -bu)"
|
|
|
+ #fi
|
|
|
+}
|
|
|
+
|
|
|
+getPhy() {
|
|
|
+ if [ -z "$1" ]; then
|
|
|
+ return
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ $MAC80211 = "0" ]; then
|
|
|
+ PHYDEV="null"
|
|
|
+ return
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -r /sys/class/net/$1/phy80211/name ]; then
|
|
|
+ PHYDEV="$(cat /sys/class/net/$1/phy80211/name)"
|
|
|
+ fi
|
|
|
+ if [ -d /sys/class/net/$1/phy80211/ ] && [ -z "${PHYDEV}" ]; then
|
|
|
+
|
|
|
+ PHYDEV="$(ls -l "/sys/class/net/$1/phy80211" | sed 's/^.*\/\([a-zA-Z0-9_-]*\)$/\1/')"
|
|
|
+ fi
|
|
|
+}
|
|
|
+
|
|
|
+checkvm() {
|
|
|
+ #this entire section of code is completely stolen from Carlos Perez's work in checkvm.rb for metasploit and rewritten (poorly) in sh
|
|
|
+ #check loaded modules
|
|
|
+ if [ -x "$(command -v lsmod 2>&1)" ]; then
|
|
|
+ lsmod_data="$(lsmod 2>&1 | awk '{print $1}')"
|
|
|
+ if [ -n "${lsmod}" ]; then
|
|
|
+ printf "${lsmod_data}" | grep -iqE "vboxsf|vboxguest" 2> /dev/null && vm="VirtualBox"
|
|
|
+ printf "${lsmod_data}" | grep -iqE "vmw_ballon|vmxnet|vmw" 2> /dev/null && vm="VMware"
|
|
|
+ printf "${lsmod_data}" | grep -iqE "xen-vbd|xen-vnif" 2> /dev/null && vm="Xen"
|
|
|
+ printf "${lsmod_data}" | grep -iqE "virtio_pci|virtio_net" 2> /dev/null && vm="Qemu/KVM"
|
|
|
+ printf "${lsmod_data}" | grep -iqE "hv_vmbus|hv_blkvsc|hv_netvsc|hv_utils|hv_storvsc" && vm="MS Hyper-V"
|
|
|
+ [ -n "${vm}" ] && vm_from="lsmod"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ #check scsi driver
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -r /proc/scsi/scsi ]; then
|
|
|
+ grep -iq "vmware" /proc/scsi/scsi 2> /dev/null && vm="VMware"
|
|
|
+ grep -iq "vbox" /proc/scsi/scsi 2> /dev/null && vm="VirtualBox"
|
|
|
+ [ -n "${vm}" ] && vm_from="/pro/scsi/scsi"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ # Check IDE Devices
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -d /proc/ide ]; then
|
|
|
+ ide_model="$(cat /proc/ide/hd*/model)"
|
|
|
+ printf "${ide_model}" | grep -iq "vbox" 2> /dev/null && vm="VirtualBox"
|
|
|
+ printf "${ide_model}" | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
+ printf "${ide_model}" | grep -iq "qemu" 2> /dev/null && vm="Qemu/KVM"
|
|
|
+ printf "${ide_model}" | grep -iqE "virtual (hd|cd)" 2> /dev/null && vm="Hyper-V/Virtual PC"
|
|
|
+ [ -n "${vm}" ] && vm_from="ide_model"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ # Check using lspci
|
|
|
+ if [ -z "${vm_from}" ] && [ "${LSPCI}" = "1" ]; then
|
|
|
+ lspci_data="$(lspci 2>&1)"
|
|
|
+ printf "${lspci_data}" | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
+ printf "${lspci_data}" | grep -iq "virtualbox" 2> /dev/null && vm="VirtualBox"
|
|
|
+ [ -n "${vm}" ] && vm_from="lspci"
|
|
|
+ fi
|
|
|
+
|
|
|
+ # Xen bus check
|
|
|
+ ## XXX: Removing unsafe check
|
|
|
+ # this check triggers if CONFIG_XEN_PRIVILEGED_GUEST=y et al are set in kconfig (debian default) even in not actually a guest
|
|
|
+ #if [ -z ${vm} ]
|
|
|
+ #then
|
|
|
+ # ls -1 /sys/bus | grep -iq "xen" 2> /dev/null && vm="Xen"
|
|
|
+ # vm_from="/sys/bus/xen"
|
|
|
+ #fi
|
|
|
+
|
|
|
+ # Check using lscpu
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -x "$(command -v lscpu 2>&1)" ]; then
|
|
|
+ lscpu_data="$(lscpu 2>&1)"
|
|
|
+ printf "${lscpu_data}" | grep -iq "Xen" 2> /dev/null && vm="Xen"
|
|
|
+ printf "${lscpu_data}" | grep -iq "KVM" 2> /dev/null && vm="KVM"
|
|
|
+ printf "${lscpu_data}" | grep -iq "Microsoft" 2> /dev/null && vm="MS Hyper-V"
|
|
|
+ [ -n "${vm}" ] && vm_from="lscpu"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ #Check vmnet
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -e /dev/vmnet ]; then
|
|
|
+ vm="VMware"
|
|
|
+ vm_from="/dev/vmnet"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ #Check dmi info
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -x "$(command -v dmidecode 2>&1)" ]; then
|
|
|
+ dmidecode 2>&1 | grep -iq "microsoft corporation" 2> /dev/null && vm="MS Hyper-V"
|
|
|
+ dmidecode 2>&1 | grep -iq "vmware" 2> /dev/null && vm="VMware"
|
|
|
+ dmidecode 2>&1 | grep -iq "virtualbox" 2> /dev/null && vm="VirtualBox"
|
|
|
+ dmidecode 2>&1 | grep -iq "qemu" 2> /dev/null && vm="Qemu/KVM"
|
|
|
+ dmidecode 2>&1 | grep -iq "domu" 2> /dev/null && vm="Xen"
|
|
|
+ [ -n "${vm}" ] && vm_from="dmi_info"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+
|
|
|
+ # Check dmesg Output
|
|
|
+ if [ -z "${vm_from}" ]; then
|
|
|
+ if [ -x "$(command -v dmesg 2>&1)" ]; then
|
|
|
+ dmesg | grep -iqE "vboxbios|vboxcput|vboxfacp|vboxxsdt|(vbox cd-rom)|(vbox harddisk)" && vm="VirtualBox"
|
|
|
+ dmesg | grep -iqE "(vmware virtual ide)|(vmware pvscsi)|(vmware virtual platform)" && vm="VMware"
|
|
|
+ dmesg | grep -iqE "(xen_mem)|(xen-vbd)" && vm="Xen"
|
|
|
+ dmesg | grep -iqE "(qemu virtual cpu version)" && vm="Qemu/KVM"
|
|
|
+ [ -n "${vm}" ] && vm_from="dmesg"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ checkvm_status="run"
|
|
|
+}
|
|
|
+
|
|
|
+#end function definitions
|
|
|
+#begin execution
|
|
|
+
|
|
|
+#here we check for any phys that have no interfaces to pick up The Lost Phys
|
|
|
+handleLostPhys
|
|
|
+
|
|
|
+listInterfaces
|
|
|
+
|
|
|
+if [ "${1}" = "check" ] || [ "${1}" = "start" ]; then
|
|
|
+ if [ "${2}" = "kill" ]; then
|
|
|
+ #if we are killing, tell scanProcesses that
|
|
|
+ scanProcesses "${2}"
|
|
|
+ exit
|
|
|
+ elif [ "${1}" = "start" ]; then
|
|
|
+ #this stub can send scanProcesses the interface name
|
|
|
+ #but this seems entirely unreliable so just run generic
|
|
|
+ #scanProcesses "${2}"
|
|
|
+ scanProcesses
|
|
|
+ else
|
|
|
+ scanProcesses
|
|
|
+ exit
|
|
|
+ fi
|
|
|
+fi
|
|
|
+
|
|
|
+if [ "$#" != "0" ]; then
|
|
|
+ if [ "$1" != "start" ] && [ "$1" != "stop" ]; then
|
|
|
+ usage
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ -z "$2" ]; then
|
|
|
+ usage
|
|
|
+ fi
|
|
|
+fi
|
|
|
+
|
|
|
+#startup checks complete, headers then main
|
|
|
+
|
|
|
+if [ "$DEBUG" = "1" ]; then
|
|
|
+ if [ -x "$(command -v readlink 2>&1)" ]; then
|
|
|
+ printf "/bin/sh -> $(readlink -f /bin/sh)\n"
|
|
|
+ if $(readlink -f /bin/sh) --version > /dev/null 2>&1
|
|
|
+ then
|
|
|
+ printf "$($(readlink -f /bin/sh) --version)\n"
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ ls -l /bin/sh
|
|
|
+ if /bin/sh --version > /dev/null 2>&1
|
|
|
+ then
|
|
|
+ /bin/sh --version
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ if [ -n "$SHELL" ]; then
|
|
|
+ if $SHELL --version > /dev/null 2>&1
|
|
|
+ then
|
|
|
+ printf "\nSHELL is $($SHELL --version)\n\n"
|
|
|
+ else
|
|
|
+ printf "\nSHELL is $SHELL\n\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+fi
|
|
|
+if [ "$VERBOSE" = "1" ]; then
|
|
|
+ if [ -n "$(command -v lsb_release 2> /dev/null)" ]; then
|
|
|
+ lsb_release -a
|
|
|
+ printf "\n"
|
|
|
+ fi
|
|
|
+ uname -a
|
|
|
+
|
|
|
+ checkvm
|
|
|
+ if [ -n "${vm}" ]; then
|
|
|
+ printf "Detected VM using ${vm_from}\n"
|
|
|
+ printf "This appears to be a ${vm} Virtual Machine\n"
|
|
|
+ printf "If your system supports VT-d, it may be possible to use PCI devices\n"
|
|
|
+ printf "If your system does not support VT-d, you can only use USB wifi cards\n"
|
|
|
+ fi
|
|
|
+
|
|
|
+ printf "\nK indicates driver is from $(uname -r)\n"
|
|
|
+ if [ "${MODPROBE}" = "1" ]; then
|
|
|
+ modprobe compat > /dev/null 2>&1
|
|
|
+
|
|
|
+ if [ -r /sys/module/compat/parameters/compat_version ]; then
|
|
|
+ printf "C indicates driver is from $(cat /sys/module/compat/parameters/compat_version)\n"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ printf "V indicates driver comes directly from the vendor, almost certainly a bad thing\n"
|
|
|
+ printf "S indicates driver comes from the staging tree, these drivers are meant for reference not actual use, BEWARE\n"
|
|
|
+ printf "? indicates we do not know where the driver comes from... report this\n\n"
|
|
|
+fi
|
|
|
+
|
|
|
+if [ "${VERBOSE}" = "1" ]; then
|
|
|
+ printf "\nX[PHY]Interface\t\tDriver[Stack]-FirmwareRev\t\tChipset\t\t\t\t\t\t\t\t\t\tExtended Info\n\n"
|
|
|
+else
|
|
|
+ printf "PHY\tInterface\tDriver\t\tChipset\n\n"
|
|
|
+fi
|
|
|
+
|
|
|
+#this whole block of code shouldn't be here, it makes no sense
|
|
|
+#per shellcheck, this block is broken as it runs the loops once with iface=listIfaceUnspec instead of the output of listIFaceUnspec
|
|
|
+#for iface in listIfaceUnspec; do
|
|
|
+#
|
|
|
+# if [ -e "/proc/sys/dev/$iface/fftxqmin" ]
|
|
|
+# then
|
|
|
+# setLink ${iface} up
|
|
|
+# printf "$iface\t\tAtheros\t\tmadwifi-ng"
|
|
|
+# if [ x$1 = "xstart" ] && [ x$2 = x$iface ]
|
|
|
+# then
|
|
|
+# IFACE=$(wlanconfig ath create wlandev $iface wlanmode monitor -bssid | grep ath)
|
|
|
+# setLink ${iface} up
|
|
|
+# if [ $CH -lt 1000 ]
|
|
|
+# then
|
|
|
+# iwconfig $IFACE channel $CH 2> /dev/null > /dev/null
|
|
|
+# else
|
|
|
+# iwconfig $IFACE freq "$CH"000000 2> /dev/null > /dev/null
|
|
|
+# fi
|
|
|
+# setLink ${IFACE} up
|
|
|
+# UDEV_ISSUE=$?
|
|
|
+# fi
|
|
|
+#
|
|
|
+# if [ x$1 = "xstop" ] && [ x$2 = x$iface ]
|
|
|
+# then
|
|
|
+# printf "$iface does not support 'stop', do it on ath interface\n"
|
|
|
+# fi
|
|
|
+#
|
|
|
+# #why, dear god why is there a random newline here?
|
|
|
+# printf "\n"
|
|
|
+# sleep 1
|
|
|
+# continue
|
|
|
+# fi
|
|
|
+#done
|
|
|
+#end random block of code that needs to die
|
|
|
+
|
|
|
+for iface in $(printf "${iface_list}"); do
|
|
|
+ unset ethtool_output DRIVER FROM FIRMWARE STACK MADWIFI MAC80211 BUS BUSADDR BUSINFO DEVICEID CHIPSET EXTENDED NET_TYPE PHYDEV ifacet DRIVERt FIELD1 FIELD1t FIELD2 FIELD2t CHIPSETt
|
|
|
+ #add a RUNNING check here and up the device if it isn't already
|
|
|
+ ethtool_output="$(ethtool -i $iface 2>&1)"
|
|
|
+ if [ "$ethtool_output" != "Cannot get driver information: Operation not supported" ]; then
|
|
|
+ getStack ${iface}
|
|
|
+ getBus ${iface}
|
|
|
+ getPhy ${iface}
|
|
|
+ getDriver ${iface}
|
|
|
+ getChipset ${iface}
|
|
|
+ if [ "${VERBOSE}" = "1" ]; then
|
|
|
+ getFrom ${iface}
|
|
|
+ getFirmware ${iface}
|
|
|
+ getExtendedInfo ${iface}
|
|
|
+ fi
|
|
|
+ else
|
|
|
+ printf "\nethtool failed...\n"
|
|
|
+ printf "Only mac80211 devices on kernel 2.6.33 or higher are officially supported by airmon-ng.\n"
|
|
|
+ exit 1
|
|
|
+ fi
|
|
|
+
|
|
|
+ #yes this really is the main output loop
|
|
|
+ if [ "${VERBOSE}" = "1" ]; then
|
|
|
+ #beautify output spacing (within reason)
|
|
|
+ FIELD1="${FROM}[${PHYDEV}]${iface}"
|
|
|
+ if [ ${#FIELD1} -gt 15 ]; then
|
|
|
+ FIELD1t="\t"
|
|
|
+ else
|
|
|
+ FIELD1t="\t\t"
|
|
|
+ fi
|
|
|
+ FIELD2="${DRIVER}[${STACK}]-${FIRMWARE}"
|
|
|
+ if [ ${#FIELD2} -gt 28 ]; then
|
|
|
+ FIELD2t="\t"
|
|
|
+ else
|
|
|
+ FIELD2t="\t\t"
|
|
|
+ fi
|
|
|
+ if [ -n "${EXTENDED}" ]; then
|
|
|
+ if [ ${#CHIPSET} -gt 70 ]; then
|
|
|
+ CHIPSETt="\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 63 ]; then
|
|
|
+ CHIPSETt="\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 56 ]; then
|
|
|
+ CHIPSETt="\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 49 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 39 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 35 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t\t"
|
|
|
+ # XXX YUP, 28 and 21 are now that same. mostly because this is all hardcoded and sucks
|
|
|
+ elif [ ${#CHIPSET} -gt 28 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 21 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 14 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t\t\t\t"
|
|
|
+ elif [ ${#CHIPSET} -gt 7 ]; then
|
|
|
+ CHIPSETt="\t\t\t\t\t\t\t\t\t"
|
|
|
+ else
|
|
|
+ CHIPSETt="\t\t\t\t\t\t\t\t\t\t"
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+ printf "${FROM}[${PHYDEV}]${iface}${FIELD1t}${DRIVER}[${STACK}]-${FIRMWARE}${FIELD2t}${CHIPSET}${CHIPSETt}${EXTENDED}\n"
|
|
|
+ else
|
|
|
+ #beautify output spacing (within reason, interface/driver max length is 15 and phy max length is 7))
|
|
|
+ if [ ${#DRIVER} -gt 7 ]; then
|
|
|
+ DRIVERt="\t"
|
|
|
+ else
|
|
|
+ DRIVERt="\t\t"
|
|
|
+ fi
|
|
|
+ if [ ${#iface} -gt 7 ]; then
|
|
|
+ ifacet="\t"
|
|
|
+ else
|
|
|
+ ifacet="\t\t"
|
|
|
+ fi
|
|
|
+ printf "${PHYDEV}\t${iface}${ifacet}${DRIVER}${DRIVERt}${CHIPSET}\n"
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$DRIVER" = "wl" ]; then
|
|
|
+ if [ "$1" = "start" ] && [ "$2" = "$iface" ]; then
|
|
|
+ startwlIface $iface
|
|
|
+ fi
|
|
|
+ if [ "$1" = "stop" ] && [ "$2" = "$iface" ]; then
|
|
|
+ stopwlIface $iface
|
|
|
+ fi
|
|
|
+ elif [ "$MAC80211" = "1" ]; then
|
|
|
+ if [ "$1" = "start" ] && [ "$2" = "$iface" ]; then
|
|
|
+ startMac80211Iface $iface
|
|
|
+ fi
|
|
|
+
|
|
|
+ if [ "$1" = "stop" ] && [ "$2" = "$iface" ]; then
|
|
|
+ stopMac80211Iface $iface
|
|
|
+ fi
|
|
|
+ fi
|
|
|
+done
|
|
|
+
|
|
|
+#end with some space
|
|
|
+printf "\n"
|
xchwarze